Table of Contents
Advertisement
1
6
This Wet/Dry Vac has blowing capabilities. To use the blower feature follow the instructions listed.
WARNING:
ALWAYS WEAR SAFETY GOGGLES COMPLYING WITH ANSI Z87.1 (OR IN
CANADA, CSAZ94.3) BEFORE USING BLOWER.
CAUTION:
KEEP BYSTANDERS CLEAR FROM BLOWING DEBRIS.
WARNING:
WEAR A DUST MASK IF BLOWING CREATES DUST THAT MIGHT
BE INHALED.
This Wet/Dry Vac has blowing capabilities. To use the blower feature follow the instructions listed
below:
1. Verify that the power cord is disconnected from the outlet. (Fig. 1)
2. Make sure the collection tank is empty before using as a blower.
3. Remove hose from the vacuum port.
4. Insert the larger end of the hose into the blower port on the back side of the power head. (Fig. 2)
5. Fit the desired attachment to the hose. (Fig. 3)
6. Verify that the power switch is in the 'O' (OFF) position before plugging the power cord into the
outlet. (Fig. 4 & 5)
7. Before turning ON the vac, firmly hold the loose end of the hose. Turn the motor on by pressing
the switch to the 'I' (ON) position. (Fig. 6)
8. Once you have completed vacuuming, press the power switch to the 'O' (OFF) position and
unplug the power cord from the outlet. (Fig. 7)
BLOWER OPERATION
2
7
3
9
4
5
Advertisement
Table of Contents
