Table of Contents
Advertisement
1
1. Verify that the power cord is disconnected from the outlet. (Fig. 1)
2. Disconnect the hose from the vacuum. (Fig. 2)
3. Undo the latches and remove the power head from the collection tank. (Fig. 3)
4. Clear all dirt or debris from the collection tank and hose. (Fig. 4)
5. Clean or replace the filters. (Fig. 5)
6. Check the hose, attachments, and power cord to verify that they have not been damaged.
IMPORTANT! Clean or change the reusable cloth filter regularly for best performance. ALWAYS
USE DUST FILTER FOR DRY VACUUMING. If the machine is used without the dust filter, the
motor will burn out and the warranty will be voided. Always keep spare dust filters on hand.
NOTICE! The filters included are made of high quality materials designed to stop small dust
particles. The dust filter should be used for dry pick-up only. A dry dust filter is necessary to
pick up dust. If the dust filter is wet, it will clog quickly and be difficult to clean. Handle the filter
carefully when removing it for cleaning or replacing. Check the filters for tears or small holes. A
small hole can let dust pass through and out of the filter. Do not use a filter with holes or tears in
it; replace it immediately.
WARNING:
ALWAYS DISCONNECT THE PLUG FROM THE POWER OUTLET BEFORE
REMOVING THE POWER HEAD FROM COLLECTION TANK.
MAINTENANCE
2
3
10
4
5
Advertisement
Table of Contents
