Advertisement
Quick Links
PROPER USE GUIDELINES
Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools are intended for occasional use and low
volume applications. A wide selection of powered application equipment for extended-use, production operations is available.
This die is a "commercial" grade die and is designed primarily for field installation, repair, maintenance work, or prototyping in industrial, commercial,
or institutional applications. Product crimped with this tool will meet the crimp height requirement for hand tools in the appropriate 114 Series
Application Specification, but may not comply with other feature parameters of the specification. TE Connectivity (TE) offers a variety of tools to
satisfy your performance requirements. For additional information, call the number at the bottom of this page.
Die
2844461-2
(1)
1. INTRODUCTION
This die assembly is used with SDE Closed Head Battery Tool 2217481-[ ] to crimp the contact/wire
combinations listed in Figure 1.
© 2017 TE Connectivity Ltd. family of companies.
All Rights Reserved.
*Trademark
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.
SDE Die Assembly; PN 2844461-2
Part Number
Locator
MOLEX
Assembly
(1)
Contact
39-00-0429
39-00-0038
39-00-0220
39-00-0041
44476-1112
2063771-1
44478-1112
45750-1212
45750-3212
Supplied with die assembly. Also available separately.
Figure 1
PRODUCT INFORMATION 1-800-522-6752
Wire Dimensions
Size
Insulation
[mm
2
]
Diameter
Length
.067 - .091
22-20 AWG
[1.70 - 2.31]
[0.30-0.50]
.118 - .130
.067 - .091
18AWG
[3.00 - 3.30]
[0.80]
[1.70 - 2.31]
.090 - .114
16AWG
[2.29 - 2.90]
[1.30]
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.te.com.
Instruction Sheet
408-35019
Rev A
20 MAR 17
Strip
1 of 5
Advertisement
Related Manuals for TE Connectivity 2844461-2
Summary of Contents for TE Connectivity 2844461-2
- Page 1 1 of 5 All Rights Reserved. For latest revision and Regional Customer Service, visit our website at www.te.com. *Trademark TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.
- Page 2 408-35019 2. DESCRIPTION Die components are shown in Figure 1. NOTE Dimensions in this Instruction Sheet are in inches [with millimeters in brackets]. Figures are not drawn to scale. 3. INSTALLATION AND REMOVAL OF DIE ASSEMBLY NOTE Refer to Figure 1, Figure 2, and Customer Manual 409-32032, Section 4.2, for die assembly and removal. NOTE: Die Installation in PN 2217481 Head Figure 2 3.
-
Page 3: Crimping Procedure
408-35019 4. CRIMPING PROCEDURE NOTE Before using the tool for production, the contact crimp height should be verified as described in Section 5. 1. Refer to Figure 1 and select the appropriate wire and crimp nest for the contact to be crimped. 2. -
Page 4: Revision Summary
If the dies are damaged or worn excessively, they must be replaced. Order dies through your representative; call 1-800-522-6752, send a facsimile of your purchase order to 717-986-7605, or write to: CUSTOMER SERVICE (038-035) TE CONNECTIVITY CORPORATION PO BOX 3608 HARRISBURG PA 17105-3608 8. - Page 5 408-35019 Tooling Compatible with Die Assembly PN 2844461-2 PRO-CRIMPER III Hand Tool Frame 354940-1 SDE-SA Hand Tool 9-1478240-0 (Instruction Sheet 408-9930) (Instruction Sheet 408-8851) SDE Bench Terminator 1490076-2 626 Adapter 679304-1 (Customer Manual 409-10052) (Instruction Sheet 408-4070) Battery Tool 2217481-1 and -2...
Need help?
Do you have a question about the 2844461-2 and is the answer not in the manual?
Questions and answers