Table of Contents
Advertisement
RUGGEDCOM WIN7249
Installation Guide
Section 1.2
Description
The RUGGEDCOM WIN7249 features various types of ports for connecting antennas and data adapters, and for
interfacing with the device.
Figure 1: RUGGEDCOM WIN7249
1. ANT 2 Port 2. RS-232 Serial Console Port 3. DC/ETH Port 4. GPS Port 5. ANT 1 Port
RS-232 Serial Console Port
ANT 1 and ANT 2 Ports
GPS Port
DC/ETH Port
Description
1
2
3
An RJ45 serial console port for interfacing directly with the base station and accessing low-
level management functions. For more information about this port, refer to the RUGGEDCOM
WIN Base Station User Guide.
CAUTION!
Security hazard - risk of unauthorized access and/or exploitation. Restrict access
to the serial console port to authorized personnel only.
N-type female ports for connecting RF (Radio Frequency) antennas. Use only RG 214/U
coaxial cables.
A TNC female port for connecting the GPS antenna.
A Power-over-Ethernet (PoE) port for supplying power to the base station and connecting it
to the network.
4
5
Chapter 1
Introduction
3
Advertisement
Table of Contents
