Motorola MG7540 User Manual page 8

 Subscribed to cable Internet service.
 Connected your MG7540.
 Powered up your MG7540. To do this, the On/Off button needs to be On. Wait for
the green online connection light
may take up to 15 minutes.
You should have a recent cable bill handy because it has your account number and
you'll probably need that.
If you're asked for information about the MG7540, you can find this on the label on
the bottom of the MG7540.
Activate
For some service providers, you activate by calling them. Many service providers
including Comcast and Cox prefer that you activate by opening the Web browser
of a computer that's plugged into one of the MG7540's Ethernet ports.
If you don't have a computer, you can use the Web browser of a Wi-Fi device such
as a smartphone or tablet. In that case you'll need the unique Wireless Network
Names (SSIDs) and Password printed on the bottom of your MG7540. Note that
your MG7540 supports two Wi-Fi bands, and there are separate SSIDs for these
bands. The bands are 2.4 and 5 GHz. Both bands use the same Password by
default. You'll use these in setting up your wireless device to connect to the
MG7540. Once you've connected, you can open the browser of that wireless
device.
to stop flashing and remain solidly lit. This