Fpim-05 And Fpim-07 - Cabletron Systems FDDI User Manual

2.1.3

FPIM-05 and FPIM-07

The FPIM-05 and FPIM-07 provide a single-mode fiber connection. The
FPIM-05 uses a MIC style connector and the FPIM-07 uses an SC type
connector. The specifications for both devices are listed in Table 2-4.
Table 2-4 FPIM-05 and FPIM-07 Specifications
Parameter
Transmitter Peak Wave Length
Spectral Width
Rise Time
Fall Time
Duty Cycle
Bit Error Rate
The link distance is up to 40 kilometers (max) and 25 kilometers (typical)
on single-mode, fiber-optic cable as specified by ANSI SMF-PMD.
7F06-02 FDDI SmartSwitch Interface Module User's Guide
Chapter 2: Network Requirements
Typical Minimum
1300 nm 1270 nm
60 nm -
3.0 nsec 2.7 nsec
2.5 nsec 2.2 nsec
50.1% 49.6%
Better than
-10
10
Maximum
1330 nm
100 nm
5.0 nsec
5.0 nsec
50.7%
2-3