Table of Contents
Advertisement
1.2.2
7C03 MMAC SmartSwitch, the 7C04 Workgroup
SmartSwitch and the 7C04-R Workgroup
SmartSwitch
The 7F06-02 Module is designed to be installed in the 7C03 MMAC
SmartSwitch, the 7C04 Workgroup SmartSwitch or the 7C04-R
Workgroup SmartSwitch.
The modular design of the 7C03 MMAC SmartSwitch allows other
modules that support Ethernet, Fast Ethernet, ATM, FDDI, or Token Ring
to be used with the 7F06-02 Module. These modules provide the
capability to share data without the use of external bridges or routers.
The 7C03 MMAC SmartSwitch is a unique module that can be installed
in an MMAC Series chassis. The 7C04 Workgroup SmartSwitch and the
7C04-R Workgroup SmartSwitch are stand-alone chassis that provide the
same functions.
1.3
FEATURES
The 7F06-02 Module provides two FDDI ports via front panel FPIMs.
The 7F06-02 Module includes the following features:
1.3.1
FPIMs
The front panel connections are standard Cabletron FPIMs. These
FPIMs allow the use of single mode or multimode fiber cable with
MIC or SC type connectors.
1.3.2
LANVIEW LEDs
The 7F06-02 uses LANVIEW, Cabletron Systems built-in visual
diagnostic and status monitoring system. With LANVIEW LEDs, you can
quickly identify, at a glance, the status of the device connected to a port
on the 7F06-02 Module.
7F06-02 FDDI SmartSwitch Interface Module User's Guide
Chapter 1: Introduction
1-3
Advertisement
Table of Contents
