Download Print this page

Western Shelter Systems WS-VC-CBTA Quick Start Manual page 15

Vehicle connector boot

Advertisement

5. Product Cases & Lids
Brush off loose debris. Wipe down with
q
a mild solution such as Simple Green™,
Tilex™ or a 10% bleach water solution.
Dry thoroughly using towels, leaf blowers
q
or sunlight, making sure to remove and dry
any padding material installed in the bottom
of the case.
Clean dirt and debris out.
q
6. Vinyl Repair
All units come standard with a vinyl repair
Ø
kit. Each kit contains a can of vinyl cement
and a supply of patching material.
To repair a damaged area, thoroughly clean
q
with soap and water.
Allow to dry completely.
q
Cut out a piece of vinyl fabric slightly larger
q
than the damaged area.
Once completely dry, apply a liberal amount
q
of vinyl cement to both the repair area and
the patch.
Allow the cement to become dry to
q
the touch and place the patch over the
damaged area. Press the patch firmly to
ensure complete contact.
7. Replacement Parts and Accessories
Western Shelter Systems offers a full line of
Ø
replacement parts, as well as a wide range
of optional accessories for all GateKeeper
shelters. To view accessories, visit www.
westernshelter.com
15

Advertisement

loading