Advertisement
Quick Links
Fountain Components
Image
Item Description
Natchez/
Esplanade
Fountain - Finial
Natchez/
Esplanade
Fountain - Small
Bowl
Esplanade 2 tier
Fountain -
Pedestal
Esplanade
Fountain - Large
Bowl
Esplanade
Fountain -
Pedestal
Esplanade
Fountain -
Pump Cover
Door
Esplanade
Fountain - Basin
FT-78 Esplanade Two Tier Fountain
Fountain Information:
• Three people are recommended for the installation of this fountain!
• This fountain holds approximately 37 gallons of water.
• This fountain uses a medium fountain cover: FTNCOV-MED
• Compatible with #10 Refill Device and LED kit
• A special stopper is required to use the refill kit for this fountain
Pump Information:
OEMPF320 - 320 GPH Pump (16 ft. cord length)
Tools Required:
Bubble Level
Screwdriver
Component
Quantity
Item #
FT-
1
77A/78A
FT-
1
77B/78B
FT-78C
1
FT-
1
78D/79A
FT-
1
78E/79B
FT-
1
78EE/79BB
FT-
1
78F/79C
Assembly Instructions
Pump Kit Parts List
Image
Component
PK300 Pump
(use adapter indicated)
#10 Stopper
Approx. 25" length of 1/2" black
non-kink tubing
Approx. 13" length of 1/2" black
non-kink tubing
Hose Clamps
Proudly
MADE IN USA
Quantity
1
1
1
1
Wedges
4
4
rev 5/21/2020
Advertisement
Related Manuals for Campania International FT-78
Summary of Contents for Campania International FT-78
- Page 1 FT-78 Esplanade Two Tier Fountain Assembly Instructions Fountain Information: • Three people are recommended for the installation of this fountain! • This fountain holds approximately 37 gallons of water. • This fountain uses a medium fountain cover: FTNCOV-MED • Compatible with #10 Refill Device and LED kit •...
- Page 2 FT-78 Esplanade Two Tier Fountain Assembly Instructions Three people are recommended for the installation of this fountain! Fountain Set-Up: Assembly & Installation - A fountain can be difficult to install without knowing and understanding the steps involved. To ensure your fountain is installed properly, please read our instructions and tips before you begin.
- Page 3 FT-78 Esplanade Two Tier Fountain Assembly Instructions Step 7 - Using a hose clamp, secure the loose end of the non-kink tubing to the pipe protruding from the bottom of the large bowl (FT-78D/79A). Step 8 - Center the large bowl (FT-78D/79A) over the large pedestal (FT-78E/79B).
- Page 4 Maintenance: Pump Care - The fountain relies heavily on the quality of the pump. A well-maintained pump can last several years. Step 1 - Fully submerge: Ensure the pump is fully submerged at all times to avoid damage. Step 2 - E nsure water level is sufficient: Check water levels regularly as water may evaporate over time, and periodically change water to avoid algae buildup.