Electrolux EW30GS65G Instalation Instructions page 2

30" GAS SLIDE-IN RANGE INSTALLATION INSTRUCTIONS
NOTE:
1. Do not pinch the power supply cord or the flexible gas conduit between the range and the wall.
2. Do not seal the range to the side cabinets.
3. 24" (61 cm) minimum clearance between the cooktop and the bottom of the cabinet when the
bottom of wood or metal cabinet is
protected by not less than ¼" (0,64 cm)
flame retardant millboard covered with
not less than No. 28 MSG sheet metal,
0,015"(0,4 mm) stainless steel,
0,024"(0,6 mm) aluminum, or 0,020"
(0,5 mm) copper.
30" (76,2 cm) minimum clearance when
the cabinet is unprotected.
4. For cutouts below 22 7/8"(58,1 cm),
appliance will slightly show out of the
cabinet.
5. Allow at least 19 ¼" (48,9 cm) clearance
for door depth when it is open.
*IMPORTANT:
than 30 1 / " (76,4 cm), make sure the appliance is centered in the counter opening
16
while pushing into it. Raise leveling legs at maximum position, insert the appliance
in the counter and then level.
legs not by the cooktop itself.
IMPORTANT:
Cabinet and countertop
width should match the cutout width.
E
E
A. HEIGHT B. WIDTH
35 5/8" (90,5 cm) -
30" (76,2 cm)
36 5/8" (93cm)
(Models with Sealed Top Burners)
To avoid cooktop breakage for cutout width (E dimension) of more
Make sure the unit is supported by the leveling
C. COOKTOP D. DEPTH TO FRONT
WIDTH
OF RANGE
31½" (80 cm) 28 5/16" (71,9 cm)
Door Open
(see note 5)
B
FRONT
CABINET
E. CUTOUT WIDTH ***
(Countertop and
Cabinet)
30±1/16"
(76,2±0,15 cm)
2
C
Side panel
22 7/8" (58,1 cm) min.
23 1/4" (59,05 cm) max.
(see Note 4)
1 1/8"
(2,86 cm)
F
OF
Ref.
F. CUTOUT
DEPTH OF COUNTERTOP
21 3/4" (55,2 cm) Min.
36 5/8" (93 cm) Max.
22 1/8" (56,2 cm) Max
35 3/4" (90,8 cm) Min.
24" (61 cm) Min. with
backguard
A
D
Figure 1
G. HEIGHT