Troubleshooting - Philips BDP7303 User Manual

12. TROUBLESHOOTING

Problem
No power.
No sound or picture.
No reaction to the remote control.
4K or 4K HDR signal does not output. Confirm that the unit is connected to a 4K or 4K HDR-compatible TV.
No Audio / video signal on the
display device via HDMI cable.
No high-definition video signal on
the TV screen.
Distorted picture.
Completely distorted picture or
black / white picture with Blu-ray
Disc™ / DVD.
No sound or distorted sound.
Cannot mute Voice Guide
Picture freezes momentarily during
disc playback.
EN
Check the AC power cord, if it is properly connected.
Try another power outlet.
Unplug the AC power cord, and wait for about 5-10 seconds. Plug it back in
and attempt to power on the unit.
Make sure both the TV and Blu-ray Disc™ player are turned on.
Confirm the connections to the TV are made properly as shown in the
"CONNECTIONS" on page 14.
Check to see whether the connected TV or another device supports HDCP.
(This unit will not output a video signal unless the other device supports
HDCP.)
Reduce the distance to infrared sensor window.
Confirm that the player's AC power cord is plugged into a power outlet.
Check the batteries in the remote control and make sure they are inserted
properly by + or - symbols.
Please check IR signal. Refer to "IR signal check" on page 65.
Confirm that the HDMI cable from the unit is connected to an HDR-compatible
HDMI port on the TV.
Confirm that the 4K or 4K HDR settings on the TV are enabled.
Confirm the "HDMI video" settings on this unit:
– 4K output is not possible when "HDMI video" on this unit is set to "480p",
"720p", "1080i", or "1080p".
– 4K HDR output is not possible when "HDMI video" on this unit is set to other
than "Auto" or "4K", or when "High Dynamic Range output" is set to "SDR".
Refer to the table on page 17 for details.
If the unit is connected via a cable box, set-top box, etc., that device might
be blocking the 4K or 4K HDR signal. Connect the unit directly to a 4K or 4K
HDR-compatible TV.
If the unit is connected to a non-certified HDMI device, the audio / video
signal will not output to that device.
Make sure the display device is on the correct input / video source.
Perform an HDMI hotplug: Disconnecting the HDMI cable from the display
device, turn on both devices, and replug the HDMI cable back in.
Check with the TV manufacturer, if there are any software updates available
for the TV.
Check to see if the HDMI cable is a certified version.
Does the disc contain high-definition video? High-definition video is only
available when the disc contains it.
Does the TV support high-definition video? High-definition video is only
available when the TV supports it.
Sometimes a small amount of picture distortion may appear. This is not a
malfunction.
Make sure the disc is compatible with this unit.
Adjust the volume.
Check to see if the speakers are connected correctly.
Check the HDMI connection.
Make sure the HDMI cable is not plugged into an HDMI-DVI adapter or
projector which does not handle digital sound.
Check the settings in the "Audio" menu.
Configure the Voice Guide display settings in the "Setup" A "Accessibility" A
"Voice Guide" A "Off". Refer to "Voice guide" on page 57
Check the disc for fingerprints / scratches and clean with a soft cloth wiping
from the center to the outer edge.
59
T ip
continued on next page