Table of Contents
Advertisement
11.6. Voice guide
Q (HOME) A "Setup" A "Accessibility"
Menus to configure various settings for the voice guide function.
1. Press [Q (HOME)] and use [
2. Use [
] to select "Accessibility", then press [OK].
3. Use [
] to select the desired setting, then press [OK].
"Voice Guide":
Turns on/off the voice guide function.
"Voice Guide volume":
Configures the volume of the voice.
"Voice Guide speed":
Configures the speech rate.
"Voice Guide pitch":
Configures the voice pitch.
"Voice Guide verbosity":
Configures whether to read detailed information on the current item/operation.
4. Use [
] to select the desired setting, then press [OK].
5. Press [Q (HOME)] to exit.
ote
D
• In order to enable the voice guide function, the OSD language needs to be set to English or Spanish. Voice guide
is not available in French.
• When voice guide is set to on, the HDMI audio settings are fixed to LPCM.
When switching HDMI audio to Bitstream or Re-encode while voice guide is set to on, voice guide will
automatically be set to off.
• Voice Guide is not available with VUDU™ and YouTube™.
• While the Voice Guide function is enabled, operations may slow down.
• When this unit is in resume-on-stop mode, the "Voice Guide" setting item is grayed-out and is not configurable.
In order to configure "Voice Guide", remove the disc to exit resume-on-stop mode or press [
home menu screen is displayed.
EN
] to select "Setup" in the home menu, then press [OK].
57
(STOP)] when the
Advertisement
Table of Contents
