Table of Contents
Advertisement
5. Voice guide setup screen will appear. Use [
• If French is selected during the language setting, the voice guide setting will be skipped.
6. Quick start setup screen will appear. Use [
7. Auto software update setup screen will appear. Use [
8. Network service setup screen will appear. Use [
• If you select "Set up now", the "Please select the connection method" screen will appear. See step 8 below.
• If you select "Skip", the home menu screen will appear.
9. Select connection method will appear.
Please select the connection
method.
Back
Cancel
• If you select "Wired", the network setup screen will appear. See step 9 below.
• If you select "Wireless", refer to "Network configuration (wireless)" on page 51 to configure network
settings.
10. Network setup screen will appear. Use [
Please select your preferred
network setup mode.
Back
Cancel
1
• If you select "Auto setup", network setting will automatically be performed.
• If you select "Manual setup", refer to step 7 - 14 in "Manual setup" on page 50.
C How to reset the OSD language
You can reset the OSD language if you selected the wrong language.
1. Press [
(HOME)] to display the home menu.
2. Use [
• This item is "Setup" (English) / "Installation" (French) / "Instalación" (Spanish).
• From here on, please select one of the following items you can find on screen:
3. Use [
] to select "Preferences" (English) / "Préférences" (French) / "Preferencias" (Spanish), then
press [OK].
4. Use [
] to select "Menu language" (English) / "Langage du menu" (French) / "Menú Idioma" (Spanish),
then press [OK].
5. Use [
] to select your desired language, then press [OK].
6. If the items that were set are displayed in your desired language, then press [
EN
Use
Wired
Wireless
1 7
Auto Setup
Manual Setup
4
] to select "
", then press [OK].
] to select "On" or "Off", then press [OK].
] to select "On" or "Off", then press [OK].
] to select "On" or "Off", then press [OK].
] to select "Set up now" or "Skip", then press [OK].
[
]
to select "Wired" or "Wireless", then press
] to select "Auto setup" or "Manual setup", then press [OK].
7
22
[OK]
.
(HOME)] to exit.
Advertisement
Table of Contents
