10.5. Voice guide
Q(HOME) A "Setup" A "Accessibility"
Menus to configure various settings for the voice guide function.
1.
Use
2. Use
to select "Accessibility", then press [OK].
3. Use
to select the desired setting, then press [OK].
"Voice Guide":
Turns on/off the voice guide function.
"Voice Guide Volume":
Configures the volume of the voice.
"Voice Guide Speed":
Configures the speech rate.
"Voice Guide Pitch":
Configures the voice pitch.
"Voice Guide Verbosity":
Configures whether to read detailed information on the current item/operation.
4. Use
to select the desired setting, then press [OK].
5. Press Q (HOME) to exit.
Note
In order to enable the voice guide function, the OSD language needs to be set to English or Spanish. Voice guide is
•
not available in French.
When voice guide is set to on, the HDMI audio setting is fixed to LPCM. Changing the HDMI audio setting is only
•
possible when voice guide is set to off.
While the voice guide function is enabled, operations may slow down.
•
When this unit is in resume-on-stop mode, the "Voice Guide" setting item is grayed-out and is not configurable. In
•
order to configure "Voice Guide", remove the disc to exit resume-on-stop mode.
EN
to select "Setup" in the home menu, then press [OK].
39