RCF EVOX 5 Owner's Manual

RCF EVOX 5 Owner's Manual

Professional active two-way arrays
Hide thumbs Also See for EVOX 5:

Advertisement

EVOX 5
EVOX 8
OWNER MANUAL
MANUALE D'USO
- PROFESSIONAL ACTIVE
TWO-WAY ARRAYS
- DIFFUSORI ACUSTICI ("ARRAY")
AMPLIFICATI A DUE VIE

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EVOX 5 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for RCF EVOX 5

  • Page 1 OWNER MANUAL MANUALE D’USO EVOX 5 - PROFESSIONAL ACTIVE TWO-WAY ARRAYS EVOX 8 - DIFFUSORI ACUSTICI (“ARRAY”) AMPLIFICATI A DUE VIE...
  • Page 2: Safety Precautions

    RCF S.p.A. will not assume any responsibility for the incorrect installation and / or use of this product. WARNING: To prevent the risk of fire or electric shock, never expose this product to rain or WARNING humidity.
  • Page 3: Notes About Audio Signal Cables

    Modifications: Any modifications made to this device that are not approved by RCF may void the authority granted to the user by the FCC to operate this equipment.
  • Page 4 RCF S.P.A. THANKS YOU FOR PURCHASING THIS PRODUCT, WHICH HAS BEEN MADE TO GUARANTEE RELIABILITY AND HIGH PERFORMANCE. DESCRIPTION EVOX 5 and EVOX 8 are portable active sound systems (made of a satellite plus a subwoofer) that combine quality and reliability of RCF transducers with high amplification power.
  • Page 5: Installation

    INSTALLATION Lift up the satellite speaker to remove it from its subwoofer. Screw the lower part of the satellite speaker stand (the pole) into the subwoofer insert for pole mounting. Screw the central part of the satellite speaker stand into its lower part, then insert the telescopic upper part.
  • Page 6 SUBWOOFER REAR PANEL AND CONNECTIONS Balanced audio input (1/4” TRS jack) 1/4” TRS JACK CONNECTOR (–) BALANCED CONNECTION ring cold sleeve ring TIP: + HOT RING: – COLD SLEEVE: GND sleeve UNBALANCED CONNECTION TIP: SIGNAL SLEEVE: GND signal PUSH BALANCED INPUT/LINK PUSH LIMITER...
  • Page 7: Limiter Led

    Amplifier volume control Turn it either clockwise to increase the volume or counterclockwise to decrease. Input sensitivity switch LINE (normal mode): the input sensitivity is set to LINE level (+4 dBu), suitable for a mixer output. MIC: the input sensitivity is set to MIC level, suitable for the direct connection of a dynamic microphone.
  • Page 8 Before connecting the power cord, check if the mains corresponds to the voltage indicated on the rating plate on the unit, if not, please contact your RCF dealer. Connect the power cord only to a mains socket outlet with a protective earthing connection.
  • Page 9: Specifications

    SPECIFICATIONS EVOX 5 EVOX 8 ACOUSTICAL Frequency response 45 Hz ÷ 20 kHz 40 Hz ÷ 20 kHz Maximum sound pressure level 125 dB 128 dB Horizontal coverage angle 120° 120° Vertical coverage angle 30° 30° Subwoofer transducers 10” (2.0” voice coil) 12”...
  • Page 10 EVOX 5 SIZE...
  • Page 11 EVOX 8 SIZE...
  • Page 12 RCF S.p.A. Via Raffaello Sanzio, 13 42124 Reggio Emilia - Italy Tel +39 0522 274 411 Fax +39 0522 232 428 e-mail: info@rcf.it...

This manual is also suitable for:

Evox 8

Table of Contents