Table of Contents
Advertisement
Approvals
Personal injury and property damage can occur
The installation of expansions that are not approved for SIMATIC NET products or their
target systems may violate the requirements and regulations for safety and
electromagnetic compatibility.
Only use expansions that are approved for the system.
Note
The test was performed with a device and a connected communications partner that also
meets the requirements of the standards listed above.
When operating the device with a communications partner that does not comply with
these standards, adherence to the corresponding values cannot be guaranteed.
EC declaration of conformity
The SIMATIC NET products described in these operating instructions meet the
requirements and safety objectives of the following EC directives and comply with the
harmonized European standards (EN) which are published in the official documentation
of the European Union and here.
• 2014/34/EU (ATEX explosion protection directive)
Directive of the European Parliament and the Council of 26 February 2014 on the
approximation of the laws of the member states concerning equipment and protective
systems intended for use in potentially explosive atmospheres, official journal of the
EU L96, 29/03/2014, pages. 309-356
• 2014/30/EU (EMC)
EMC directive of the European Parliament and of the Council of February 26, 2014 on
the approximation of the laws of the member states relating to electromagnetic
compatibility; official journal of the EU L96, 29/03/2014, pages. 79-106
• 2011/65/EU (RoHS)
Directive of the European Parliament and of the Council of 8 June 2011 on the
restriction of the use of certain hazardous substances in electrical and electronic
equipment, official journal of the EC L174, 01/07/2011, pages 88-110
You will find the EC declaration of conformity for these products on the Internet pages of
Siemens Industry Online Support
(https://support.industry.siemens.com/cs/ww/en/ps/15326/cert).
The EC Declaration of Conformity is available for all responsible authorities at:
Siemens Aktiengesellschaft
Digital Industries
DE-76181 Karlsruhe
Germany
76
WARNING
Operating Instructions, 10/2021, C79000-G8976-C453-04
SCALANCE SC-600
Advertisement
Table of Contents
