Device Basics
Getting to Know Your Device
Barcode reader
❶
Accessory screw hole
❷
Rear camera lens and flash LED
❸
USB Type A port
❹
USB Type C connector
❺
Power jack
❻
VESA mounting hole
❼
Battery cover latch
❽
Speaker
❾
*Depending on the model, this button may be barcode reader button.
Depending on the model, the power button of your device may be located on the top side of the device instead.
Installing and Charging the Battery Pack
The battery pack is the internal power source for the device. It is rechargeable using the AC charger.
To install the battery pack, follow these steps:
1.
Carefully place the device upside down.
2.
Slide both battery cover latches towards the unlock (
3.
Lift up the battery cover from the opening and take it off the device (❷).
Battery cover
❿
Microphone
⓫
Charge indicator
⓬
Front camera lens
⓭
Power button*
⓮
Volume buttons
⓯
Touch screen
⓰
NFC sensor
⓱
Dock connector
⓲
) position (❶).