Page 5
Step 2: Use 5/16´´ X 4 ½´´ bolts (A) to attach the back-trellis wall (3) to the posts. Each part has a series of numbers that indicate where to attach the part with the corresponding number. 5/16´´ X 4 ½´´ Bolts P| 4 GARDEN ARBOR BENCH www.ForeverRedwood.com...
Page 6
Step 4: Use 5/16´´ X 3´´ bolts (C) to attach the supports (5) to the posts. Each part has a series of numbers that indicate where to attach the part with the corresponding number. 5/16´´ X 3´´ Bolts P| 5 GARDEN ARBOR BENCH www.ForeverRedwood.com...
Page 7
Step 6: Attach the front-knee braces (6) to the support with 5/16´´ x 3´´ bolts (C) and to the posts with 5/16´´ x 4 ½´´ bolts (A). Each part has a series of numbers that indicate where to attach the part with the corresponding number. 5/16´´ X 3´´ Bolts 5/16´´ X 4 ½´´ Bolts P| 6 GARDEN ARBOR BENCH www.ForeverRedwood.com...
Page 8
Step 7: Finally, use 8´´ x 3´´ deck screws (D) to attach each slat (7) to the supports. Each part has a series of numbers that indicate where to attach the part with the corresponding number. 8´´ X 3´´ Deck Screws P| 7 GARDEN ARBOR BENCH www.ForeverRedwood.com...
Page 9
This completes the Arbor Bench assembly. Hope you enjoy your set for many decades. If you ever have a problem or a question, don't hesitate to call us (866 332 2403) or email us. We are here to support you. P| 8 GARDEN ARBOR BENCH www.ForeverRedwood.com...
Need help?
Do you have a question about the GARDEN ARBOR BENCH and is the answer not in the manual?
Questions and answers