Panasonic KX-TGJ420E Operating Instructions Manual page 54

Hide thumbs Also See for KX-TGJ420E:
Table of Contents

Advertisement

Useful Information
Making/answering calls, intercom
Problem
is displayed.
Noise is heard, sound cuts
in and out.
Sound quality seems to be
getting worse.
The handset does not ring. R The ringer volume is turned off. Adjust ringer volume (page 17,
The base unit does not
ring.
I cannot make a call.
Caller ID/Talking Caller ID
Problem
Caller information is not
displayed.
54
Cause/solution
R The handset is too far from the base unit. Move closer.
R The base unit's AC adaptor is not properly connected.
Reconnect AC adaptor to the base unit.
R The handset is not registered to the base unit. Register it
(page 39).
R Activating eco mode reduces the range of the base unit in
standby mode. If required, turn eco mode off (page 16).
R You are using the handset or base unit in an area with high
electrical interference. Re-position the base unit and use the
handset away from sources of interference.
R Move closer to the base unit.
R If you use a DSL/ADSL service, we recommend connecting a
DSL/ADSL filter between the base unit and the telephone line
jack. Contact your DSL/ADSL provider for details.
R You have registered a handset that is not recommended. The
clearest sound quality is only possible by registering the
provided handset.
31).
R Do not disturb mode is turned on. Turn it off (page 35).
R If the handset is registered to multiple base units, the handset
may not be able to make or receive calls or communicate with
the base unit when the following conditions are met.
– Eco mode is set to "Eco Plus" (page 16).
– Base unit selection is set to "Auto" (page 33).
In this case, place the handset near the base unit, then press
MECON and select "Eco" or "Eco Off". Repeat for each base
unit.
R The ringer volume is turned off. Adjust ringer volume (page 17,
31).
R You dialled a call restricted number (page 38).
R The key lock feature is turned on. Turn it off (page 19).
Cause/solution
R You must subscribe to a Caller ID service. Contact your phone
service provider for details.
R If your unit is connected to any additional telephone
equipment, remove and plug the unit directly into the wall jack.
R If you use a DSL/ADSL service, we recommend connecting a
DSL/ADSL filter between the base unit and the telephone line
jack. Contact your DSL/ADSL provider for details.
R Other telephone equipment may be interfering with this unit.
Disconnect the other equipment and try again.
Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tgj422eKx-tgj423eKx-tgj424e

Table of Contents