Advertisement
• Advise other people in the work area that the unit can reach
a very high temperature and should be considered
potentially dangerous.
• Turn off the power switch while taking breaks and when
finishing using.
• Before replacing parts or storing the system, turn off the
power and let it cool down to the room temperature.
• Warning: this tool must be placed on its stand when not in
use.
• A fire may result if the appliance is not used with care,
therefore:
o be careful when using the appliance in places where
there are combustible material;
o do not apply to the same place for a long time;
o do not use in presence of an explosive atmosphere;
o be aware heat may be conducted to combustible
materials that out of sight;
o place the appliance on its stand after use and allow it to
cool down before storage;
o do not leave the appliance unattended when it is
switched on.
5.3 Take care of your tools
Do not use the tools for any applications other than soldering
or desoldering.
Do not rap the iron against the work bench or otherwise
subject the iron to severe shocks.
Do not file the soldering tip to remove the oxide, please wipe
the tip on the cleaning sponge.
Use only accessories or attachments which are listed in the
operation manual. Use of other tools and other accessories can
lead to a danger of injury.
Please turn off the power before connecting or disconnecting
the soldering iron.
7
www.tmatlantic.com
Advertisement
