Advertisement
display. The set-point can be changed for ±1°C by tapping the
"UP" or "DOWN" button. Pressing the button will change the
set-point quickly. The digital display will return automatically to
the actual value and the iron will reach to the setting
temperature quickly.
③ * display: Switching the temperature display from °C to °F
by pressing the "*"button and then the electronic system will
display the actual temperature① and setting temperature②
in °F, and vice versa.
④When the actual temperature on the soldering tip is less
than the set-point, "HEAT ON" will display and make the
desoldering tip heating up.
⑤When the absolute offset is more than ±10°C between the
actual temperature and the set-point on the soldering tip or
the nozzle, "WAIT" will display. It means that the temperature
electronic control system is not in the stable situation, we
should wait a moment to let the "WAIT" disappear.
⑥When "ERROR" display, there may be a trouble on the
system, or the soldering iron is not connected to the control
system correctly.
3.3 Using desoldering gun
www.tmatlantic.com
4
Advertisement
