Connecting The Units; Connection Diagram - Pioneer GM-D8704 Owner's Manual

Setting the unit
Signal waveform when outputting at
high volume using amplifier gain
control
If the signal waveform is distorted due to high
output, even if the amplifier gain is raised, the
output power will change only slightly.

Connecting the units

Connection diagram

2 3
5
j
k
1
g
f
1 Battery wire (sold separately)
The maximum length of the wire be-
tween the fuse and the positive + term-
inal of the battery is 30 cm (12 in.).
For the wire size, refer to Connecting the
power terminal. The battery wire, the
ground wire and the optional direct
ground wire must be same size. After
making all other connections at the am-
plifier, connect the battery wire terminal
of the amplifier to the positive + term-
inal of the battery.
2 Fuse (80 A) (sold separately)
Each amplifier must be separately fused at
80 A.
3 Positive + terminal
4 Negative (*) terminal
5 Battery (sold separately)
6 Ground wire, Terminal (sold separately)
En
7
8
6
4
9
d b
h
i
c
e