Victor Ambassador AMB1 Manual

AMBASSADOR HOTCUPBOARDS & BAIN MARIES
MODEL NUMBERS
Thank you for buying a Victor Unit. We hope and expect that you will get many years of
satisfactory use from your purchase.
In order to achieve the best results from your equipment please read, and follow, the
installation, operating, cleaning and maintenance instructions below. Failure to follow
them may affect the warranty.
1.

UNPACKING AND ASSEMBLY

All protective coating used on stainless steel surfaces of the hot cupboard must be
removed. The exposed surfaces can then be wiped clean with a damp cloth, using a
mild detergent or soap if necessary.
DO NOT USE ANY ABRASIVE MATERIAL OR FORM OF BLEACH FOR CLEANING PURPOSES.
Please see cleaning section of these instructions.
MOBILE MODELS: Four Castors are fitted, two of which are braked.
TOWING MODELS: Four heavy duty swivel directional lock castors are fitted and towing
bracket. When the unit is on tow, the castors should be locked into
the direction of travel, so they do not swivel.
2.

INSTALLATION

Where the appliance is to be positioned in close proximity to a wall, partition, kitchen
furniture, decorative finishes, etc., it is recommended that they be made of a non
combustible material or clad in a suitable non-combustible heat insulating material and
that the closest attention be paid to fire preventative regulations.
The appliance is fitted with a 13 Amp fused plug and only requires connection to a
suitable 13 Amp socket outlet. This model is suitable for 230 – 240V A.C. supply only.
Ensure that the electricity supply is as stated on the model's data plate.
V
AMB1 AMB2
AMB5 AMB6T
AMB22 AMB32
AMB30TOW AMB32TOWS
AMB3T
AMB20
AMB20TOW
AMB32TOWT
1
AMB4T
AMB30
AMB22TOW