Install And Remove Rail Kits - Synology NAS SA3600 Hardware Installation Manual

Install and Remove Rail Kits

Here we use RKS1317 as an example to illustrate how to install or remove the rail kits. For more information
about the rail kit installation, please refer to the Quick Installation Guide that comes with the rail kit.
To install the rail kit:
1 To install the rail kit to the rack
a Attach the rear end of the rail kit assembly to the rack.
b Slide the front latch outward and insert the brackets into the rack holes.
2 Extend and pull out the inner rail from the assembly.
15 Chapter 2: Hardware Setup