Screen Adjustment; Digital Input; Analog Input; [Screen] - Eizo FlexScan S2433WH User Manual

- Screen Adjustment
Digital Input
When digital signals are input, images are displayed correctly based on the
preset data of the monitor, but if characters and/or lines appear blurred, go to
step 6 "To modify blurred characters/lines [Smoothing]". When performing
more advanced adjustment, see "2-3 Color Adjustment"
subsequent pages.
Analog Input
The monitor screen adjustment is used to suppress flickering of the screen or
adjust screen position and screen size correctly according to the PC to be used.
The auto adjust function works in the following cases:
• When a signal is input into the monitor for the first time
• When the resolution or Vertical/Horizontal Frequency not
displayed before is set
If the screen is not displayed correctly even after performing the auto
adjustment, perform the screen adjustments according to the procedures on the
following pages to use the monitor comfortably.
[Adjustment Procedure]
1
Perform the auto adjustment.
● To adjust flickering, screen position, and screen size
automatically [Screen]
(1) Choose <Screen> from the <Auto Adjustment> menu, and press
.
The <Auto Adjustment> menu appears.
(2) Choose <Execute> with
Flickering, screen position, and screen size are corrected by the auto-
adjustment function.
If the screen is not displayed correctly even after adjusting in step
1 above, perform the adjustments according to the procedures on
the following pages. When the screen is displayed correctly, go to
step 5 "To adjust color gradation automatically [Range]".
2
Prepare the display pattern for the analog display adjustment.
Load the "EIZO LCD Utility Disk" to your PC, and then open the screen
adjustment pattern files.
1
Chapter 2 Settings and Adjustments
(page 17) and
.
or , and press
Attention
• Wait 30 minutes or more from
monitor power on before starting
adjustments.
• Auto adjust function does not work
for the images under the resolution of
800 × 600 (SVGA).
Attention Attention
• This function works correctly when • This function works correctly when
an image is fully displayed over the an image is fully displayed over the
Windows or Macintosh display area. Windows or Macintosh display area.
It does not work properly when an It does not work properly when an
image is displayed only on a part of image is displayed only on a part of
the screen (command prompt window, the screen (command prompt window,
for example) or when a black for example) or when a black
background (wallpaper, etc.) is in use. background (wallpaper, etc.) is in use.
• This function does not work correctly • This function does not work correctly
with some graphics boards. with some graphics boards.
• "Auto in Progress" appears on the • "Auto in Progress" appears on the
screen during auto adjustment. screen during auto adjustment.
NOTE NOTE
• For how to open and contents of the • For how to open and contents of the
screen adjustment pattern files, refer screen adjustment pattern files, refer
to "Readme.txt". to "Readme.txt".