2-6 Setting On/Off for the automatic
brightness adjustment function
[Auto EcoView]
The sensor on the front side of the monitor detects the environmental brightness
to adjust the screen brightness automatically and comfortably by using the Auto
EcoView function.
.
(1) Press
The <Auto EcoView> setting menu appears.
(2) The On/Off setting is toggled by pressing
2-7 Setting On/Off for Power Saving mode
[Power Save]
This function allows you to set the monitor into the power saving mode
according to the PC status.
(1) Choose <PowerManager> from the Adjustment menu, and press
(2) Choose <Power Save> from the <PowerManager> menu, and press
The <Power Save> setting menu appears.
(3) Select "On" or "Off" with
The setting is completed.
■
Analog input
This monitor complies with the VESA DPMS standard.
[Power Saving System]
PC
Operating
Power saving
STAND-BY
SUSPENDED
OFF
■
Digital input
This monitor complies with the DVI DMPM standard.
[Power Saving System]
The monitor enters the power saving mode in five seconds in connection with
the PC setting.
PC
Operating
Power saving
18
Chapter 2 Settings and Adjustments
.
or
, and press
Monitor
Operating
Power saving
Monitor
Operating
Power saving
.
.
.
Power
Indicator
Blue
Orange
Power Indicator
Blue
Orange
NOTE
NOTE
• Be careful not to block the sensor on
• Be careful not to block the sensor on
the lower side of the monitor when
the lower side of the monitor when
using the Auto EcoView function.
using the Auto EcoView function.
Attention
Attention
• Turning off the main power switch
• Turning off the main power switch
or unplugging the power cord
or unplugging the power cord
completely shuts off power supply to
completely shuts off power supply to
the monitor.
the monitor.
• Power consumption changes even
• Power consumption changes even
when a sound input signal is detected.
when a sound input signal is detected.