Setting Eizo Logo Display On/Off; Resuming The Default Setting [Reset]; To Reset Color Adjustment Values; To Reset All Adjustments To The Factory Default Settings - Eizo FlexScan S2202W User Manual

2-17 Setting EIZO logo display ON/OFF

The EIZO logo appears on the display when turning on the monitor. This
function allows you to display, or not, the EIZO logo.
to turn off the monitor.
(1) Press
down to turn on the monitor.
(2) Press holding
The EIZO logo display setting is toggled by performing the operation in step 2.

2-18 Resuming the Default Setting [Reset]

There are two types of Reset. One is to reset the color adjustment only to the
default settings, and the other is to reset all the settings to the default settings.
●

To reset color adjustment values

Only the adjustment values in the current FineContrast mode will revert to the
default settings (factory settings).
(1) Choose <Color> from the Adjustment menu, and press
(2) Choose <Reset> from the <Color> menu and press
The <Reset> menu appears.
(3) Select <Reset> with
The color adjustment values revert to the default settings.
●

To reset all adjustments to the factory default settings

Reset all adjustments to the factory default settings.
(1) Choose <Others> from the Adjustment menu, and press
(2) Choose <Reset> from the <Others> menu, and press
The <Reset> menu appears.
(3) Select <Reset> with
All setting values revert to the default settings.
22
Chapter 2 Settings and Adjustments
.
or , and press
.
or , and press
• After resetting, you cannot undo the • After resetting, you cannot undo the
.
.
• For main default settings, refer • For main default settings, refer
.
.
Attention Attention
operation. operation.
NOTE NOTE
to "Main default settings (factory to "Main default settings (factory
settings)" on page 29. settings)" on page 29.