20. Assemble the Motor A Flexible Board and Motor B Flexible Board as shown in the figure.
Motor A Flexible Board
Adhesive Sheet
(4 mm x 4 mm)
21. Stick on the two Adhesive Sheets as shown in the figure.
22. Stick on the LF-2130 Flexible Board as shown in the figure.
23. Match the Main Flexible Assy (0030) to the bosses and assemble it as shown in the figure.
Main Flexible
Assy (0030)
24. Connect the Motor A Flexible Board and Motor B Flexible Board to the connector on the Main Flexible Assy
(0030).
25. Match the Main Flexible Assy (0030) to the bosses and assemble it with the screw as shown in the figure.
FDR-AX40/FDR-AX53/FDR-AX55/FDR-AXP55
Bosses
Bosses
Adhesive Sheet
(8 mm x 12 mm)
Adhesive Sheet
(12 mm x 4 mm)
LF-2130 Flexible Board
M1.7 x 2.5
(Tightening torque = 0.16 ± 0.01N · m)
T O
P
Bosses
Motor B Flexible Board
Adhesive Sheet
(6 mm x 5 mm)
4-47