Sony FDR-AX40 Service Manual page 103

13. Stick on the Motor A Flexible Board as shown in the figure.
Adhesive Sheet
(5 mm x 5 mm)
14. Assemble Frame (E-Sub-Ａ (0030A)) and Frame (E-Sub-B (0030A)) with six screws.
Frame (E-Sub-B (0030A))
M2 x 3
(Tightening torque
= 0.16 ± 0.01N · m)
P
T O
15. Stick on the Adhesive Sheet to the LF-2130 Flexible Board.
16. Connect the LF-2130 Flexible Board to the connector on the CM-1017 board and stick on it as shown in the
figure.
12 mm
Adhesive Sheet
FDR-AX40/FDR-AX53/FDR-AX55/FDR-AXP55
Motor A
Flexible Board
M2 x 3
(Tightening torque = 0.16 ± 0.01N · m)
LF-2130 Flexible Board
T O
P
M2 x 4
(Tightening torque = 0.16 ± 0.01N · m)
Frame (E-Sub-A (0030A))
Claw
CM-1017 Board
4-45