The Microphone - Silvercrest HS1000 User Manual And Service Information

The microphone

Do not use the supplied plug-in microphone with any audio
devices other than this gaming headset.
When you wish to use it, plug the supplied microphone (B) into the
microphone socket (4) of the gaming headset.
Put on the headphones and position the microphone in front of your
mouth.
Set the microphone switch (9) on the control unit integrated into the
headset cable to the "ON" position. The microphone indicator light (10)
comes on and the microphone is then activated.
If you now speak into the microphone, you will hear your own voice via
the headphones. Due to the wide range of different hardware and
software of the computers available on the market, your own voice can
sound louder or softer. If necessary, correct the volume level using the
volume control (8), or check the settings in your operating system (as
described on the next pages).
You can deactivate the microphone at any time. To deactivate the
microphone, set the microphone switch (9) on the control unit in the
headset cable to the "OFF" position. The microphone indicator light (10)
goes out and the microphone is deactivated.
The microphone operates with automatic noise suppression to
remove surrounding noises from the sound of your voice. For
optimal operation, the microphone should be positioned quite
close to the mouth.
Silvercrest Gaming Headset HS-1000
English - 71