How To Use - Hamilton Beach 76778W Manual

How to Use

1. Plug into outlet.
2. Lift up Piercing Lever.
NOTES:
• This Can Opener will easily open all standard-size cans.
• It will be necessary to position Can Opener at the edge of the
counter, allowing for clearance to open cans taller than the Can
Opener. To ensure taller cans do not fall from Can Opener, place
hand under can.
• If there is a bump, dent, or heavy seam in the rim of the can, open
other end of can or start cutter just beyond it.
• Cans made with aluminum lids will not adhere to magnet.
• The motor of your Can Opener will never require oiling.
• To use Cord Storage on back of Can Opener, push in or pull out
cord as needed.
3. Place rim of can firmly under
Magnetic Lid Holder and
against geared wheel.
4. Press Piercing Lever all the
way down. The motor will
begin turning can and cutting
lid. (It is not necessary to hold
Piercing Lever down during
cutting action. It may be
necessary to hold bottom of
some large, heavy cans during
cutting action.)
5. Motor will stop automatically
when the can is open.
5