Hamilton Beach Sure Cut 76371, 76371R - Can Opener Manual

Parts and features

1. Magnetic Lid Holder
2. Can Guide
3. Release/Insert Button
4. Piercing Lever
5. Cutting Blade

How to use the can opener

1. Place can opener on level surface and plug cord into outlet.
2. Raise piercing lever up.
3. Place rim of can firmly under can guide and against geared wheel.
   
4. Tilt top of can in to position cutting blade inside rim of can.
5. Press piercing lever all the way down. The motor will begin turning can and cutting lid. (It is not necessary to hold piercing lever down or to hold can during cutting action when opening smaller cans. When opening a larger can, the user may need to stabilize the can opener with one hand.)
6. The motor will automatically stop when the can is open.

To store and lock cord: When finished, unplug and push excess cord into the back of unit for storage. To lock, turn cord sideways and slide up into cord lock slot.

How to use the knife sharpener

1. Place cutting edge of knife in knife slot located on back of can opener.
   
2. Draw knife blade through slot several times. Clean knife after sharpening.
   NOTICE: To prevent damage to can opener and knives, do not insert serrated blades into this unit.

Care and cleaning

Electric Shock Hazard. Do not immerse the can opener in water or any other liquid.

1. Unplug cord from outlet.
2. To remove piercing lever: Push Release/Insert Button to right. Grasp magnetic lid holder and pull lever out.
   
3. Wash lever in hot, soapy water. Rinse and dry thoroughly.
4. Wipe body of can opener with a damp cloth. NEVER immerse can opener in water.
5. To insert piercing lever: Push Release/Insert Button to right and insert lever.
6. Ensure lever is fully inserted into the can opener.
   See top view of can opener below. The gap between piercing lever and body of can opener indicates that cutting assembly IS NOT fully inserted.
   

Tips for best use

• The can opener will easily open all standard size cans.
• If there is a bump, dent, or heavy seam in rim of can, openother end of can or start cutter just beyond it.
• Cans made with aluminum lids will not adhere to magnet.
• The motor of your can opener is permanently lubricated and willrequire no oiling.
• To use cord storage on back of opener, push in or pull out cordas needed.
• If cutting assembly lever does not rotate freely, remove and clean.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Hamilton Beach Sure Cut 76371, 76371R - Can Opener Manual