Attaching The Optional Arm (Or Optional Stand); Attaching The Original Stand - Eizo FlexScan EV2785 User Manual

●

Attaching the optional arm (or optional stand)

1. Lay the LCD monitor on a soft cloth spread over a stable and flat surface with the panel surface
facing down.
2. Remove the stand.
As shown in the figure, while holding down the lock button (1), slide the stand toward the stand base until it
touches the stand base (2). Then, lift the stand up (3).
3. Attach the arm or stand to the monitor.
Use the VESA mounting screws supplied with this product when attaching the arm or stand.
●

Attaching the original stand

1. Remove the fixing screws on the optional arm (or optional stand), and detach the optional arm (or
optional stand).
2. Lay the LCD monitor on a soft cloth spread over a stable and flat surface with the panel surface
facing down.
3. Attach the original stand.
Insert the four tabs on the stand into the four holes on the back panel (1), and slide the stand towards the
upper portion of the monitor (2). The stand clicks when it is attached correctly.
32
Chapter 6 Reference
(3)
(1)
(2)
(1)
(2)
Click!