ProblEM
Iron does not
heat up.
Water leaks out
of the iron.
Iron does not
produce steam.
All LEDS flash
and unit beeps.
898693-Iron-EN-04.indd 12
TROUBLEShOOTING
CAusE
•
The power plug (11) is not
connected properly to
the electrical outlet or the
circuit breaker is tripped.
•
The temperature setting is
set to off.
•
The auto shut-off function
has been activated.
•
The water tank (20) is
overfilled.
•
The set temperature has
not been reached or is too
low.
•
Water level in the water
tank (20) is too low.
•
The set temperature has
not been reached.
•
The function control (5)
is not set to the steam
ironing
position.
•
Anti-drip function shuts
off steam when the
temperature setting is too
low.
•
Iron is defective.
soluTion
•
Re-connect the power
plug (11) properly to the
outlet or check the circuit
breaker.
•
Press the temp. button
(4) to select the desired
temperature.
•
Tilt the iron back and forth
to restart the iron.
•
Pour out some water.
•
Allow sufficient time for
the iron to preheat or set
higher temperature.
•
Add water in the water
tank (20).
•
Allow sufficient time for
the iron to heat up.
•
Set the function control (5)
to the steam ironing
position.
•
Set temperature higher.
•
Please contact our
Customer Assistance at
1.877.207.0923 (U.S.) or
1.877.556.0973 (Canada).
12
2/9/12 4:58 PM