Anti-Drip Function; Auto Shut-Off Function - GE 898693 Manual

Anti-drip function

• This feature is designed to prevent water from dripping from the soleplate (21)
when the iron is not heated enough. During use, the iron may emit a clicking sound,
particularly while heating up or cooling down. This is normal and indicates the iron
is functioning normally.

Auto shut-off function

• If the iron is not moved for a certain period of time, it will shut off automatically.
• After shut off, the iron stops heating up and the auto off indicator (13) lights up.
• Tilt the iron back and forth to resume the work with the last temperature setting.
Turning iron off and emptying water tank
• After use, press the temp. button (4) on either side of the iron until the off indicator
(18) lights up (ill. d ).
• Slide the function control (5) to dry ironing
Disconnect the iron from the electrical outlet and let it cool on its heel (10) (ill. e ).
•
• Open the fill inlet cover (2) and hold the iron upside down over a sink to empty the
water tank (20) (ill. l ).
Store the iron on its heel (10) in a safe place (ill. e ).
•
CAuTion! burn Hazard: During the cooling process, do not touch the soleplate (21) to
check the temperature (ill. f ).
898693-Iron-EN-04.indd 10
OPERATION (CONT.)
Position illustration
On soleplate
On the side
On the heel
Time
30 seconds
30 seconds
15 minutes
position (ill. g ).
10
2/9/12 4:58 PM