Download Print this page

ingenuity Patter Pals 60725-ES Manual page 2

Advertisement

WARNING
EN
FALL HAZARD: Babies have suff ered skull fractures falling while in and from
bouncers when not used properly.
• Use bouncer ONLY on fl oor
• NEVER lift or carry baby in bouncer
SUFFOCATION HAZARD: Babies have suff ocated when bouncers tipped over on
soft surfaces.
• NEVER use on a bed, sofa, cushion, or other soft surface.
• NEVER leave baby unattended.
To prevent falls and suff ocation:
• ALWAYS use restraints. Adjust to fi t snugly.
• Use the product only if the child meets ALL of the following conditions:
o Cannot sit up by himself or herself (approximately six months of age)
o Weighs more than 3kg and less than 9 kg.
• This bouncer is not intended for prolonged periods of sleeping.
• NEVER lift bouncer using a toy bar as a handle.
• NEVER use as an infant carrier for automobile or airline travel.
• NEVER attach any additional strings or straps to product or toy bar
IMPORTANT
• Adult assembly required.
• Please read all instructions before assembly and use of the product.
• Care should be taken in unpacking and assembly.
• Examine product frequently for damaged, missing, or loose parts.
• DO NOT use if any parts are missing, damaged, or broken.
• Contact Kids II for replacement parts and instructions if needed. Never substi-
tute parts.
• This product has not been designed for sleeping. Should your child need to
sleep, they should be placed in a suitable cot or bed.
– 2 –
Auseinandernehmen der Wippe für die Lagerung:
DE
Mit einem kleinen Kreuzschlitzschraubendreher die Freigabeknöpfe an der
Innenseite der Verbindungsnabe an der Wippe hineindrücken.
Das Fußstützenrohr und die Rohre des Basisrahmens von jeder Verbindungs-
nabe nehmen.
Para desmontar o cadeira de descanso para armazenamento:
PT
Use uma pequena chave de fenda Phillips para soltar os botões de liberação
na parte interna de cada cubo de conexão da cadeira.
Remova o tubo do suporte para os pés e os tubos da armação da base de
cada cubo de conexão.
Per smontare la sdraietta per la conservazione:
IT
Utilizzare un cacciavite con testa a croce piccolo per premere i pulsanti di sgancio
presenti sulla parte interna di ogni snodo di collegamento della sdraietta.
Rimuovere il tubo poggiapiedi e i tubi del telaio base da ogni snodo di collega-
mento.
– 23 –

Advertisement

loading