Page 1
Item # : W58SMD Assembly Instructions Please visit our website for the most current instructions, assembly tips, report damage, or request parts. www.walkeredison.com Copyright 2018 by Walker Edison Furniture Co., LLC. All rights reserved.
A Phillips head screwdriver is required for the assembly of this product . Power tools should not be used to assemble this product. Drill may be needed for securing product to wall. Copyright 2018, by Walker Edison Furniture Co., LLC. All rights reserved.
Plastic wedge Glue tube Philips head screwdriver required for assembly (not included) The hardware quantities listed above are required for proper assembly. Some extra hardware may also have been included. Copyright 2018, by Walker Edison Furniture Co., LLC. All rights reserved.
Page 5
Step 1 Attach cam bolt (B) to part (1) with screwdriver. Insert wooden dowel (A) into part (2). Copyright 2018 by Walker Edison Furniture Co., LLC. All rights reserved.
Page 6
Step 2 Insert wooden dowel (A) into part (4,3,5,6). Insert Cam bolt (B) into part(4,3,5,6)by using screwdriver Copyright 2018 by Walker Edison Furniture Co., LLC. All rights reserved.
Page 7
Step 3 Insert wooden dowel (A) into part (9,10,11). Copyright 2018 by Walker Edison Furniture Co., LLC. All rights reserved.
Page 8
Step 4 Insert wooden dowel (A) into part (8) Attach part (7) to part (2) using Shoulder Screw (F) with hex key (G). Copyright 2018 by Walker Edison Furniture Co., LLC. All rights reserved.
Page 9
Step 5 Attach part (9) to part (5,6,4,3), then insert and secure cam lock (C) to part (9) to lock it. Copyright 2018 by Walker Edison Furniture Co., LLC. All rights reserved.
Page 10
Step 6 Attach part (10,11) to part (2) using Shoulder Screw (F) with hex key (G). Long grooves on parts (10,11,2) should be aligned. Copyright 2018 by Walker Edison Furniture Co., LLC. All rights reserved. P.10...
Page 11
Step 7 Attach part (5,6) to part (2,8) using cam lock (C) to secure it. Copyright 2018 by Walker Edison Furniture Co., LLC. All rights reserved. P.11...
Page 12
Step 8 Attach part (3,4) to part (2,8) using cam lock (C) to secure it. Copyright 2018 by Walker Edison Furniture Co., LLC. All rights reserved. P.12...
Page 13
Step 9 Slide panel (18,14) into grooves as per diagram Attach part (19) to part (18) Attach part (15) to part (19) Copyright 2018 by Walker Edison Furniture Co., LLC. All rights reserved. P.13...
Page 14
Step 10 Attach part (1) to part (9,10,11), then insert and secure cam lock (C) to part (9,10,11) to lock it. Copyright 2018 by Walker Edison Furniture Co., LLC. All rights reserved. P.14...
Page 15
Step 11 Attach plastic wedge (Q) per diagram using screw (P) with screwdriver. Copyright 2018 by Walker Edison Furniture Co., LLC. All rights reserved. P.15...
Page 16
Step 12 Attach sticker (D) as per diagram Copyright 2018 by Walker Edison Furniture Co., LLC. All rights reserved. P.16...
Page 17
Step 13 Insert shelf support pin (H) into part (9,10,11). Copyright 2018 by Walker Edison Furniture Co., LLC. All rights reserved. P.17...
Page 18
Step 14 Place shelf (12,13) on top of support pin. Copyright 2018 by Walker Edison Furniture Co., LLC. All rights reserved. P.18...
Page 19
Step 15 Attach handle (M) to part (16,17) with bolt (N). Attach pully (L) with bolt (E). attach door guide (K) with screw (J). Copyright 2018 by Walker Edison Furniture Co., LLC. All rights reserved. P.19...
Page 20
Step 16 Place door guide (K) on door into the groove on part (2). Then hang pully (L) on part (8). Door should fit securely and glide smoothly. Copyright 2018 by Walker Edison Furniture Co., LLC. All rights reserved. P.20...