Page 1
Pos : 2 /953-El oma/D ec kbl ätter _neu/Genius _MT _BET @ 19\mod_1526997909753_6.doc @ 215549 @ @ 1 GENIUS SIZES: 6-11, 10-11, 12-21, 20-11, 20-21 ENERGY TYPE: ELECTRIC, GAS Translation of the original operating instructions Subject to technical changes. Read carefully before use. Keep safe for future use.
Page 2
82216 Maisach Germany T. +49 (0) 8141 395-0 F. +49 (0) 8141 395-130 Visit our website www.eloma.com for user tips and recipes Please also feel free to contact our application advice department: T. +49 (0) 8141 395-150 E-mail application@eloma.com You can contact us almost 24 hours a day, 7 days a week, 365 days a year: T.
Overview of the device signs used Use of figures Variants and device sizes Safety Qualifications of operating staff Safety notes Description of the device, operating modes and functions Characteristics of the Eloma GENIUS and Genius BACKMASTER Edition devices Operating modes Additional functions Special programs...
Page 4
Table of contents Control system structure and operation Operating controls Operating the Multi-Touch display screen Start screen GENIUS start screen Selecting the operating mode Screens for the operating modes steam, combi-cooking and convection Step overview screen Making/changing settings PROGRAM LIST/FAVOURITES Program list/favourites screen Selecting cooking program Selecting special program...
Page 5
Table of contents Ongoing operation 11.1 Ongoing operation screen 11.2 Start from manual cooking/baking 11.3 Starting the cooking/baking program from the step overview screen 11.4 Starting the cooking/baking program from the program list 11.5 Changing the cooking/baking program 11.6 Stopping the cooking/baking program 11.7 Re-starting the program GENIUS...
Page 6
Table of contents Settings/Service 14.1 Changing the general settings 14.2 Password manager Troubleshooting 15.1 Causes of fault and measures 15.2 Fault messages and remedies Disposal and environmental protection Appendix 17.1 Maintenance notes === Ende der Liste für T extmar ke Inhalt3 ===...
Pos : 10 /953-El oma/BET/1_Z u diesem Dokument/Bes timmungsgemäß e Ver wendung der Geräte @ 19\mod_1524723854096_6.doc @ 211869 @ 2 @ 1 INTENDED USE OF THE DEVICES Eloma combi steamers are designed for commercial purposes only and must only be used for thermal preparation of food products, using accessories (grills, containers, trays, trolleys, inserts etc.) which are suitable for the device and the...
About this document WARRANTY AND LIMITATION OF LIABILITY The device must not be modified technically, e.g. constructional conversion, without the approval of the manufacturer/supplier. Any warranty or guarantee cover will be rendered null and void in case of unauthorised technical modifications.
About this document STRUCTURE OF WARNINGS AND THE SYMBOLS USED Symbol Explanation Warning: This symbol is followed by a warning Instruction for action with multiple steps: Multiple instructions for actions have to be carried out in the stipulated order. Single-step instruction for action: Precisely one instruction for ...
About this document Pos : 14 /953-El oma/BET/1_Z u diesem Dokument/Übersic ht der verwendeten Gerätes chil der @ 19\mod_1524726844071_6.doc @ 212001 @ 2 @ 1 OVERVIEW OF THE DEVICE SIGNS USED Warning and information signs with the following meanings are attached to all combi steamers where they are clearly visible: Sign Meaning...
About this document USE OF FIGURES INFORMATION: Figures are shown as examples and may differ from the supplied device. Pos : 16 /953-El oma/BET/1_Z u diesem Dokument/Bauformen und Ger ätebaugrößen_GMT @ 19\mod_1524730511288_6.doc @ 212133 @ 2 @ 1 VARIANTS AND DEVICE SIZES The GENIUS combi steamer is supplied in the following sizes: Designation...
Safety SAFETY All Eloma devices comply with the relevant safety standards. However, this does not mean that all residual risks, such as those caused by incorrect operation, can be ruled out. Pos : 18 /953-El oma/BET/2_Sic her heit/Qualifi kati on des Bedi enpersonals @ 19\mod_1524732128131_6.doc @ 212267 @ 2 @ 1...
Close the operating company's water tap. Have repairs are carried out by an authorised Eloma service partner and/or qualified specialists only. WARNING! Risk of injury from parts falling out! ...
Page 14
Safety 2.2.2 DURING COOKING OPERATION CAUTION! Risk of crushing when opening and closing the cooking chamber door! Crushing injuries to the fingers and hands! Make sure that there is nobody in the pivoting range of the cooking chamber door. ...
Page 15
Safety CAUTION! Risk of scalding due to hot air and hot steam! Hot air and hot steam can escape when opening the device door. Wear protective clothing (e.g. long-sleeved clothing and protective gloves). Open the cooking chamber door carefully. CAUTION! Risk of toppling if the device is loaded top-heavy! ...
Page 16
Safety CAUTION! Material damage due to damaged glass panes! Do not operate the device with damaged glass panes and faulty cooking chamber light. Dispose of any foods which are contaminated with glass fragments. CAUTION! Material damage due to overheating! ...
Page 17
Safety WARNING! Risk of burns from hot fat! Only ever set up deep fat fryers or similar containers with hot fat out of the range of the hose with spray head. CAUTION! Material damage due to improper cleaning! Do not clean the housing with the hose with spray head, a water jet, steam cleaner or a high-pressure cleaner.
Page 18
2.2.7 MAINTENANCE WARNING! Risk of fire due to improper maintenance! Have maintenance work is carried out by an authorised Eloma service partner only. Adhere to the maintenance intervals see section 13.10. Adhere to the rules of conduct in case of fire see section 2.2.1.
GENIUS Backmaster Edition are reliable employees. The multifunctional Eloma combi steamer provides the kitchen team with support for all working procedures and thus makes sure that the chef and the kitchen team can do their job with the requisite passion and concentration.
Description of the device, operating modes and functions OPERATING MODES Pos : 30 /953-El oma/BET/3_Ger ätebesc hrei bung, Betriebs arten und Funkti onen/D ampf @ 18\mod_1523955686773_6.doc @ 202586 @ 3 @ 1 3.2.1 STEAM In steam mode the foods are cooked at a constant temperature, surrounded by a high level of humidity (water vapour).
Description of the device, operating modes and functions ADDITIONAL FUNCTIONS Pos : 35 /953-El oma/BET/3_Ger ätebesc hrei bung, Betriebs arten und Funkti onen/Vor heiz en/C ool D own (Auto-Temp) @ 18\mod_1523956836060_6.doc @ 202751 @ 3 @ 1 3.3.1 PREHEAT/COOL DOWN (AUTO-TEMP) The additional preheat/cool down (auto temp) function is used to preheat or cool down the cooking chamber temperature to the set target temperature.
Page 22
Description of the device, operating modes and functions 3.3.6 SPS® – STEAM PROTECTION SYSTEM The additional Steam Protection System (SPS®) function is used to extract the vapours in the device shortly before the end of a cooking program. This way, only a few vapours escape when opening the cooking chamber door.
Description of the device, operating modes and functions SPECIAL PROGRAMS Special programs are preconfigured with recommended settings, which can however be changed as required. Special programs are only available on the GENIUS Pos : 42 /953-El oma/BET/3_Ger ätebesc hrei bung, Betriebs arten und Funkti onen/D elta-T-Gar en @ 18\mod_1523959198919_6.doc @ 203081 @ 3 @ 1 3.4.1 DELTA-T COOKING Delta-T cooking is a special form of low-temperature cooking.
Pos : 48 /953-El oma/BET/3_Ger ätebesc hrei bung, Betriebs arten und Funkti onen/Tr ans fer Gerät zu USB_GMT @ 18\mod_1523963660874_6.doc @ 203411 @ 3 @ 1 3.6.1 DEVICE TO USB TRANSFER The following data can be copied from the device to the USB stick. This data can also be analysed, edited and printed using Eloma's ProConnect software: • Cooking/baking programs •...
Functional parts and operation FUNCTIONAL PARTS AND OPERATION Pos : 51 /953-El oma/BET/4_F unkti ons teil e und Betrieb/GeniusMT /Funktionsteile_MM_GMT_[Titel] @ 18\mod_1523889576088_6.doc @ 200631 @ 2 @ 1 FUNCTIONAL PARTS Pos : 52 /953-El oma/BET/4_F unkti ons teil e und Betrieb/GeniusMT /Geräteübersic ht Tis chg eräte_GMT @ 19\mod_1524827989658_6.doc @ 212692 @ 3 @ 1 4.1.1 DEVICE OVERVIEW, TABLE-TOP DEVICES Fig.
Page 26
Functional parts and operation 4.1.2 DEVICE OVERVIEW, STANDALONE DEVICES Fig. 3: Device overview: Standalone device, gas, right-hinged door Door handle Inner door – Single glazing on door with halogen lighting and double glazing – Double glazing on door with LED lighting and triple glazing Cooking chamber door Drip tray Cooking chamber...
Functional parts and operation OPENING AND CLOSING THE DOOR NOTICE! Before starting work it is imperative that you familiarise yourself with section "Safety"! Pay attention to whether the door is right-hinged or left-hinged! Secure table-top devices to prevent them from slipping or toppling over. Pos : 55 /953-El oma/BET/4_F unkti ons teil e und Betrieb/GeniusMT /Tür öffnen bei ei nstufiger T ür mec hani k @ 19\mod_1525094320769_6.doc @ 213247 @ 3 @ 1 4.2.1 OPENING THE DOOR WITH A SINGLE-STAGE DOOR MECHANISM...
Page 28
Functional parts and operation 4.2.2 OPENING THE DOOR WITH A DUAL-STAGE DOOR MECHANISM (OPTIONAL) Push the door handle down. – The device door latches in the ventilation position. – The door handle moves back into the latched position. Allow steam to escape.
Functional parts and operation LOADING AND EMPTYING THE DEVICE NOTICE! Before starting work, it is imperative that you familiarise yourself with the section "Safety" and the special notes and warnings see section 2.2.2. Only use the stipulated container sizes. ...
Page 30
Functional parts and operation Open the cooking chamber door. Insert the tray trolley/mobile plate rack. Secure the tray trolley/mobile plate rack with the brake lever. Close the cooking chamber door. Start the cooking process. Open the cooking chamber door. Release the brake lever. Remove the tray trolley/mobile plate rack.
Page 31
Functional parts and operation 4.3.2 STANDALONE DEVICES WITH TRAY TROLLEY/MOBILE PLATE RACK INFORMATION: • Check the exact insertion height. • Check that the containers are properly in place in the tray trolley/mobile plate rack. • Only use suitable containers which are also firmly in place. •...
Page 32
Functional parts and operation WARNING! Risk of toppling and uncontrolled movement by the tray trolley/mobile plate rack and transportation trolley! Crushing. Only use the tray trolley/mobile plate rack and transportation trolley on an even floor. Apply the brakes on castors with brakes when loading, unloading and in the park position.
Page 33
Functional parts and operation CAUTION! Material damage due to protruding handle! Door glass breakage. Remove the handle before closing the cooking chamber door. Fig. 8: Fitting the handle on the tray trolley Push the handle through the lugs from below. Push the handle down.
Functional parts and operation SWITCHING ON THE DEVICE NOTICE! Condensation due to a change in ambient temperature! Damage to the control electronics. Make sure that the ambient temperature of the device is above +4 °C. Open the operating company's water connection. Press the On/Off key.
Functional parts and operation MEASURES IN CASE OF POWER FAILURE Characteristics of the device in case of power failure • The display is extinguished. • The fan wheel stops. • The heater stops. Close the operating company's water connection. Open the cooking chamber door. INFORMATION: ...
Functional parts and operation USING DEVICE COMPONENTS Pos : 67 /953-El oma/BET/4_F unkti ons teil e und Betrieb/GeniusMT /Sc hl auc hbraus e @ 18\mod_1524229611397_6.doc @ 207667 @ 3 @ 1 4.7.1 HOSE WITH SPRAY HEAD WARNING! Generation of hot steam when spraying water into the hot cooking chamber! Scalding.
Page 37
Functional parts and operation 4.7.2 EXTERNAL TEMPERATURE PROBE (OPTIONAL) INFORMATION: Two probe variants are available: • External core temperature probe • External sous vide probe (for vacuum cooking) Fig. 10: Connection socket for external core temperature probe and sous vide probe Fig.
Page 38
Functional parts and operation CAUTION! Risk of burns from hot temperature probe! Minor skin burns. Wear protective gloves. CAUTION! Risk of injury from the tip of the temperature probe! Puncture wound. Take care not to injure yourself or other persons in the vicinity. ...
Control system structure and operation CONTROL SYSTEM STRUCTURE AND OPERATION Pos : 70 /953-El oma/BET/5_Steuerings aufbau und - bedienung/Bedi enelemente_en @ 21\mod_1551793295589_6.doc @ 237030 @ 244 @ 1 OPERATING CONTROLS Object Designation/function Keys <OFF> key <ON> key Controllers Controllers can be shifted in Climatic® MT monitor to change setting values.
Page 40
Control system structure and operation Action line Action line Shows action line Hides action line Fig. 12: Example of action line...
Page 41
Control system structure and operation Selection window Fig. 13: Example of selection window Selection windows are superimposed as a second level on the screen, and display advanced setting options. Selection windows are opened by touching a field and closed by touching the same field again or touching an area outside the selection window.
Control system structure and operation OPERATING THE MULTI-TOUCH DISPLAY SCREEN Fig. 14: Ready for Operation screen and Start screen Item Symbol Designation/function Ready for operation screen Start screen Switches to the after a short time. Main menu line Contains information and the most important control commands for the overview.
Page 44
Start screen Symbol Designation/function Weekly program field Switches to the weekly program settings. (Field is a multifunctional key design. Depending on the parameter setting it can be assigned for the weekly program, Multi Cooking, regeneration, Delta-T cooking, low-temperature cooking or Cook & Hold). Cleaning and servicing field Cleaning and servicing Switches to the...
Page 45
Further operating options are available for service staff and Eloma's trained customer service department. QuickMode is set, for example by the branch manager. The branch manager defines the programs & images for the screen before actual use.
Page 46
Start screen QuickMode Last20® QuickMode Last20® Fig. 17: screen INFORMATION: • If QuickMode is activated, only this screen appears when the device is switched on. Start screen • At the end of the last program, the QuickMode appears. • It is impossible to return immediately to full mode.
Start screen SELECTING THE OPERATING MODE INFORMATION: Start screen Select the manual cooking/baking fields on the to switch to the Manual cooking/baking. screens for Select one of the following fields from the main menu line: • Cooking mode –...
Page 48
Start screen Item Symbol Designation/function Main menu line with operating modes Cooking operating modes see section 6.3 Steam field Switches to steam mode. Combi-cooking field Switches to combi-cooking mode. Convection field Switches to convection mode. Baking operating modes see section 12 Baking field with steam injection Switches to baking mode with steam injection.
Page 49
Start screen Item Symbol Designation/function STOP field (Only available when the program is in progress) Stops the cooking/baking program. Manual cooking/baking screen Tab. 9: Elements of the INFORMATION: The respective activated field is highlighted (green). Pos : 77 /953-El oma/BET/6_Startbildsc hirm/Bil dsc hirme für die Betriebs arten D ampf, Kombi dampf und H eißluft_[Titel] @ 21\mod_1550668422540_6.doc @ 233773 @ 2 @ 1...
Start screen SCREENS FOR THE OPERATING MODES STEAM, COMBI- COOKING AND CONVECTION Pos : 78 /953-El oma/BET/6_Startbildsc hirm/Betri ebs art Kombi dampf @ 21\mod_1550668552427_6.doc @ 233806 @ 3 @ 1 6.3.1 COMBI-COOKING MODE Fig. 19: Manual cooking screen for combi-cooking mode (Climatic® MT monitor displayed)
Page 51
Start screen Fig. 20: Manual cooking screen for combi-cooking mode (Climatic® MT monitor hidden) INFORMATION: Climatic® MT monitor is hidden from the screen by swiping upwards with the finger, and the operator then accesses the additional functions and further inputs.
Page 52
Start screen Item Symbol Designation/function Core temperature field Controls the cooking program using the core temperature. (Only available with a connected CT probe) Humidity field Sets the humidity. Temperature field Sets the temperature. Fan speed field • Table-top devices in 5 increments •...
Page 53
Start screen 6.3.2 STEAM MODE Manual cooking Fig. 21: screens for steam mode (Climatic® MT monitor displayed and hidden) INFORMATION: The fan timer function is not available for steam mode. Function Default value Setting range Temperature 99°C 30°C … 130°C 210°F 86°F …...
Page 54
Start screen 6.3.3 CONVECTION MODE Manual cooking Fig. 22: screens for convection mode (Climatic® MT monitor displayed and hidden) Item Symbol Designation/function Active dehumidification field Activates/deactivates active dehumidification. (Only available in convection mode) Tab. 13: Additional elements for convection mode...
Page 55
Start screen Function Default value Setting range Temperature 180°C 30°C … 300°C 356°F 86°F … 572°F Clima Aktiv Active dehumidification deactivated Active dehumidification activated Cooking time 00:30h 00:01h … 23:59h or continuous operation Core temperature 70°C 20°C … 100°C 158°F 68°F …...
Start screen STEP OVERVIEW SCREEN Step overview Fig. 23: screen, e.g. with 3 cooking steps Item Symbol Designation/function Main menu line 01:30/70°C Total time of all cooking steps or set core temperature. List of all cooking steps. h00:30 Cooking time of the cooking step. Select operating mode for the cooking step.
Start screen MAKING/CHANGING SETTINGS Pos : 84 /953-El oma/BET/6_Startbildsc hirm/Feuc htig kei t eins tell en/ändern @ 21\mod_1550673480896_6.doc @ 233971 @ 3 @ 1 6.5.1 CHANGING HUMIDITY Set/change humidity screen Fig. 24: INFORMATION: The humidity can be set or changed manually using the slider (1) in the vertical Humidity direction or the UP/DOWN arrow keys (2) underneath the display...
Page 58
Start screen 6.5.2 CHANGING THE TEMPERATURE Set/change temperature screen Fig. 25: INFORMATION: The temperature can be set or changed manually using the slider (1) in the horizontal direction or the UP/DOWN arrow keys (2) underneath the Temperature display field. Pos : 86 /953-El oma/BET/6_Startbildsc hirm/Garzei t oder Ker ntemperatur eins tell en/änder n @ 21\mod_1550673765827_6.doc @ 234037 @ 344 @ 1...
Page 59
Start screen 6.5.3 SETTING/CHANGING THE COOKING TIME OR CORE TEMPERATURE INFORMATION: The cooking step can be controlled using the cooking time or the setpoint core temperature. Setting/changing cooking time Set/change cooking time screen Fig. 26: INFORMATION: When the Cooking time field is selected (green), the cooking time can be set or changed manually using the UP/DOWN arrow keys (1).
Page 60
Start screen Fig. 27: Set/change core temperature screen INFORMATION: When the Core temperature field is selected (green), the core temperature can be set or changed manually using the UP/DOWN arrow keys (1). Pos : 87 /953-El oma/BET/6_Startbildsc hirm/Zusatzfunktionen wählen und ei nstellen @ 21\mod_1550674331163_6.doc @ 234070 @ 3 @ 1...
Page 61
Start screen 6.5.4 SELECTING AND SETTING ADDITIONAL FUNCTIONS INFORMATION: Activated or changed additional functions are highlighted in green in the Additional functions field area. 5b/c Additional functions Fig. 28: field area screen Item Symbol Designation/function Fan timer field Can be set for a predefined speed. SPS®-Steam Protection System field Switches on the steam extraction at the end of a cooking program.
Page 62
Start screen Item Symbol Designation/function End time field Defines the end time of the cooking program. Additional functions Tab. 16: Elements of the field area Pos : 88 /953-El oma/BET/6_Startbildsc hirm/Garsc hritt hinz ufügen, änder n, l ösc hen und duplizi eren_en @ 21\mod_1551794845488_6.doc @ 237098 @ 34444 @ 1 6.5.5 ADDING, CHANGING, DELETING AND DUPLICATING A COOKING STEP INFORMATION:...
Page 63
Start screen Cooking settings Select cooking step 1 on the screen. Select the Add field ( Cooking settings screen is displayed for the new cooking step 2. The current cooking step number is displayed with the symbol for the operating mode. Select the operating mode from the main menu.
Page 64
Start screen Deleting a cooking step Fig. 31: Delete cooking step screen Cooking settings Select the step overview field on the screen. Step overview screen is displayed. Select a cooking step. Select the arrow (< ). Select the Delete field. The cooking step highlighted in green is deleted, the number of cooking steps is reduced by 1.
Page 65
Start screen Duplicating a cooking step Fig. 32: Duplicate cooking step screen Cooking settings Select the Step overview field on the screen. Step overview screen is displayed. Select a cooking step. Select the arrow (<). Select the Duplicate field ( The cooking step highlighted in green appears again at the end of the step overview.
Page 66
Start screen 6.5.6 SETTING THE TIMER Preset start / End time Fig. 33: screen Manual cooking Call up the screen. Select the Start time/End time field. The respective timer setting is highlighted in green. Set the desired time with the UP/DOWN arrow keys. INFORMATION: ...
PROGRAM LIST/FAVOURITES PROGRAM LIST/FAVOURITES Pos : 91 /953-El oma/BET/7_Programmliste/F avoriten/Bilds chir m Programmliste/F avoriten_en @ 21\mod_1551797989241_6.doc @ 237132 @ 2 @ 1 PROGRAM LIST/FAVOURITES SCREEN INFORMATION: Start The program list and favourites are called up by selecting the fields on the screen Program list Fig.
Page 68
PROGRAM LIST/FAVOURITES Item Symbol Designation/function Field for Poultry menu group Field for Meat menu group Field for Fish menu group Field for Baking menu group Field for Side order menu group Field for Desserts menu group Field for Regeneration menu group Program list field Special programs Back field...
Page 69
PROGRAM LIST/FAVOURITES Item Symbol Designation/function Browse field < Arrow for displaying the action line for the program 28:05 Display of program duration Tab. 17: Elements of the Program list screen Pos : 92 /953-El oma/BET/7_Programmliste/F avoriten/Garprogramm wählen_[Titel] @ 21\mod_1550734094235_6.doc @ 234236 @ 2 @ 1...
PROGRAM LIST/FAVOURITES SELECTING COOKING PROGRAM Pos : 93 /953-El oma/BET/7_Programmliste/F avoriten/Garprogramm in ei ner M enü-Gr uppe s uc hen_en @ 21\mod_1551798476452_6.doc @ 237166 @ 3 @ 1 7.2.1 BROWSING FOR A COOKING PROGRAM IN A MENU GROUP Fig. 35: Cooking programs in a menu group with hidden action line (left) and displayed action line (right) Select the desired field from the menu group.
Page 71
PROGRAM LIST/FAVOURITES 7.2.2 BROWSING FOR A COOKING PROGRAM BY ENTERING KEY WORDS Fig. 36: Browsing for cooking programs using key words Select the Browse field. – A keypad is displayed. Enter the keyword using the keypad. – The list of cooking programs is refined to the entered keyword. Call up the action line of the selected cooking program by touching the arrow left in the cooking program line.
Page 72
PROGRAM LIST/FAVOURITES 7.2.3 SELECTING ADDITIONAL FUNCTIONS FOR A SAVED COOKING PROGRAM Fig. 37: Calling up the action line a cooking program from the program list (left) and the favourites (right) Start screen Call up the program list or favourites overview on the Call up the action line for the selected program by touching the arrow ( <...
Page 73
PROGRAM LIST/FAVOURITES 7.2.4 CHANGING THE ADDITIONAL PREHEAT/COOL DOWN (AUTO-TEMP) FUNCTION Change preheat/cool down (auto-temp) temperature Fig. 38: screens INFORMATION: The factory setting for the preheating temperature is +10%, but it can be Settings/Service changed in Select the Preheat/cool down (auto-temp) field in the action line. Activate function by setting the switch to the left.
Page 74
PROGRAM LIST/FAVOURITES 7.2.5 CHANGING COOKING SETTINGS Step overvie Fig. 39: Call up the cooking settings from the Call up the Step overview in the action line. Manual cooking Switching to the screen Change the cooking settings. Save the change. Fig. 40: Sequence for changing cooking settings Pos : 98 /953-El oma/BET/7_Programmliste/F avoriten/Z eitvor wahl einstellen_en @ 21\mod_1551799639951_6.doc @ 237336 @ 3 @ 1...
Page 75
PROGRAM LIST/FAVOURITES 7.2.6 SETTING THE TIMER Fig. 41: Setting the timer in the program list Select the Timer field in the action line of the program list. Start time/End time – selection window appears. Activate the start time or end time (switch to the left). –...
PROGRAM LIST/FAVOURITES SELECTING SPECIAL PROGRAM Pos : 100 /953- Eloma/BET /7_Pr ogrammliste/F avoriten/Bildsc hirme Aus wahlfenster Sonderpr ogramme_en @ 21\mod_1551799874337_6.doc @ 237404 @ 34444 @ 1 7.3.1 SPECIAL PROGRAM SELECTION WINDOW SCREENS Regeneration Regeneration selection window Fig. 42: Item Symbol...
Page 77
PROGRAM LIST/FAVOURITES Delta-T cooking Delta-T cooking Fig. 43: selection window Item Symbol Designation/function Delta-T cooking field Special programs selection field Delta-T cooking field Cooking settings with the first Delta-T cooking cooking step Delta-T + Delta-T cooking field Cooking settings with the multiple Delta-T cooking cooking steps Tab.
Page 78
PROGRAM LIST/FAVOURITES Low-temperature cooking Low-temperature cooking Fig. 44: selection window Item Symbol Designation/function Low-temperature cooking field Special programs selection field Low-temperature cooking field Cooking settings with the first low-temperature cooking cooking step Convection + Low-temperature cooking field Sets the operating mode to convection before the low-temperature cooking cooking step.
Page 79
PROGRAM LIST/FAVOURITES Cook & Hold Cook & Hold Fig. 45: selection window Item Symbol Designation/function Cook & Hold field Special programs selection field Convection + Cook & Hold field Open the program list. Selected cooking program with Cook & Hold as the last cooking step Convection + Cook &...
Page 80
PROGRAM LIST/FAVOURITES Pos : 101 /953- Eloma/BET /7_Pr ogrammliste/F avoriten/Sonder programme Reg enerier en, Niedertemperatur-Garen oder D elta-T-Gar en starten @ 21\mod_1550737116059_6.doc @ 234533 @ 3 @ 1 7.3.2 STARTING THE SPECIAL PROGRAMS REGENERATION, LOW-TEMPERATURE COOKING OR DELTA-T COOKING Program list Select and touch the Special program field on the screen.
(see section 12.12 for further explanations on Multi Baking). Pos : 105 /953- Eloma/BET /8_M ulti C ooki ng/Multi Bxaking/M ulti C ooking eins tell en und starten_[Ti tel] @ 21\mod_1550738396733_6.doc @ 234666 @ 2 @ 1...
Multi Cooking/Multi Baking SETTING AND STARTING MULTI COOKING Pos : 106 /953- Eloma/BET /8_M ulti C ooki ng/Multi Bxaking/M ulti C ooking i n der Akti onszeil e des gewähl ten Programms _en @ 21\mod_1551800525552_6.doc @ 237472 @ 3 @ 1 8.2.1 MULTI COOKING IN THE ACTION LINE OF THE SELECTED PROGRAM Fig.
Page 83
10. Multi Cooking ends with the end of the last selected program. Pos : 108 /953- Eloma/BET /8_M ulti C ooki ng/Multi Bxaking/Liste der Garpr ogramme für M ulti C ooking ändern_[Titel] @ 21\mod_1550739086761_6.doc @ 234765 @ 2 @ 1...
Touch and hold the cooking program in the program list. Drag the cooking program to the desired position in the list. Pos : 110 /953- Eloma/BET /8_M ulti C ooki ng/Multi Bxaking/Gar programm aus Liste l ösc hen @ 21\mod_1550739227640_6.doc @ 234831 @ 3 @ 1 8.3.2 DELETING A COOKING PROGRAM FROM THE LIST Select the field ( <...
Page 85
Add a manual time or set continuous operation. Save as necessary. INFORMATION: The timer setting is not applied when adding during operation. Pos : 114 /953- Eloma/BET /9_Wochenpr ogramm/Woc henprogramm_[Ti tel] @ 21\mod_1550739933010_6.doc @ 234964 @ 1 @ 1...
Weekly program WEEKLY PROGRAM Pos : 115 /953- Eloma/BET /9_Wochenpr ogramm/Bil dsc hirm Woc henprogramm_en @ 21\mod_1551800974326_6.doc @ 237540 @ 2 @ 1 WEEKLY PROGRAM SCREEN INFORMATION: Start screen The weekly program is called up by selecting the field on the Weekly program screen is opened.
Page 87
Removes the selected weekly program. Weekly program display Cooking/baking program display Cleaning program display Tab. 22: Elements of the Weekly program screen Pos : 116 /953- Eloma/BET /9_Wochenpr ogramm/Woc henprogramm hi nz ufügen_en @ 21\mod_1551801164138_6.doc @ 237574 @ 2 @ 1...
The list of saved cooking programs or the list of cleaning programs is displayed. Select the cooking program/cleaning program to add the cooking program/cleaning program to the weekly program. Pos : 117 /953- Eloma/BET /9_Wochenpr ogramm/Woc henprogramm änder n/löschen @ 21\mod_1550740988549_6.doc @ 235063 @ 2 @ 1...
Weekly program mode is only available when the device is in standby mode. The weekly program symbol appears on the standby screen. Pos : 118 /953- Eloma/BET /10_Speic hern von Gar-/Bac kpr ogrammen/Speic her n von Gar-/Bac kprogrammen_[Titel ] @ 21\mod_1550741611085_6.doc @ 235097 @ 1 @ 1...
Saving cooking/baking programs 10 SAVING COOKING/BAKING PROGRAMS Pos : 119 /953- Eloma/BET /10_Speic hern von Gar-/Bac kpr ogrammen/Bildsc hir m Speicher n_en @ 21\mod_1551801364103_6.doc @ 237608 @ 2 @ 1 10.1 SAVE SCREEN Fig. 51: Save screen and data input and assignment...
Page 91
Saves as a new cooking program. Back field Returns to the previous view. Save Tab. 23: Elements of the screen Pos : 120 /953- Eloma/BET /10_Speic hern von Gar-/Bac kpr ogrammen/Speic her n von Gar-/Bac kprogrammen @ 21\mod_1550742118981_6.doc @ 235163 @ 2 @ 1...
Page 93
The cooking/baking program is overwritten or added to the list of programs. Cooking/Baking programs – screen is displayed. Pos : 123 /953- Eloma/BET /10_Speic hern von Gar-/Bac kpr ogrammen/Barc ode- und Pr oduktc odever waltung @ 21\mod_1550743344268_6.doc @ 235262 @ 3 @ 1...
Page 94
When manually entering EAN 13 barcodes, leave off the first 0. This data is then the equivalent of that scanned with a scanner. Pos : 124 /953- Eloma/BET /11_Laufender Betrieb/Laufender Betrieb_[Ti tel] @ 21\mod_1550743914785_6.doc @ 235296 @ 1 @ 1...
Ongoing operation ONGOING OPERATION Pos : 125 /953- Eloma/BET /11_Laufender Betrieb/Bildsc hir m laufender Betri eb_en @ 21\mod_1551801547468_6.doc @ 237642 @ 2 @ 1 11.1 ONGOING OPERATION SCREEN Ongoing operation Fig. 53: screen for the cooking program (closed step display, left and open...
Page 96
Ongoing operation Ongoing operation Fig. 54: screen for the cooking program, restarting Item Symbol Designation/function Display of cooking steps Setting information on every cooking step Cooking step field • Select to open the step display (if multiple steps are available). •...
Page 97
Selected special programs / additional functions 39:12 Remaining time until program end Tab. 25: Elements of the Ongoing operation screen Pos : 126 /953- Eloma/BET /11_Laufender Betrieb/Start aus manuell es Koc hen/Bac ken @ 21\mod_1550745981872_6.doc @ 235362 @ 2 @ 1...
STARTING THE COOKING/BAKING PROGRAM FROM THE STEP OVERVIEW SCREEN Fig. 56: Screen of a multiple-step manual program when starting Pos : 128 /953- Eloma/BET /11_Laufender Betrieb/Gar-/Bac kpr ogramms aus der Programmliste s tarten_en @ 21\mod_1551802614604_6.doc @ 237744 @ 2 @ 1...
Ongoing operation 11.4 STARTING THE COOKING/BAKING PROGRAM FROM THE PROGRAM LIST Cooking Fig. 57: Starting a program from the program list (left) or a cooking step from the settings screen (right) Program list screen Select the desired program. The action line appears. Cooking settings screen: Set the cooking settings for one or more cooking steps.
Page 101
The set start time or end time is displayed. If necessary, press the STOP field to change settings. INFORMATION: The additional preheating function can be ended prematurely. Pos : 129 /953- Eloma/BET /11_Laufender Betrieb/Gar-/Bac kpr ogramm änder n_[Titel] @ 21\mod_1550831643056_6.doc @ 235499 @ 2 @ 1...
Ongoing operation 11.5 CHANGING THE COOKING/BAKING PROGRAM Pos : 130 /953- Eloma/BET /11_Laufender Betrieb/Ist-Temperatur und Ist-F euc htig keit anzeigen @ 21\mod_1550831885113_6.doc @ 235532 @ 3 @ 1 11.5.1 DISPLAYING THE ACTUAL TEMPERATURE AND ACTUAL HUMIDITY When the Actual temperature/actual humidity field is selected, the actual temperature and the actual humidity are displayed simultaneously in order to make changes to the cooking/baking settings as necessary.
Page 103
Ongoing operation Pos : 134 /953- Eloma/BET /11_Laufender Betrieb/M anuelles Besc hwaden ei nstellen @ 21\mod_1550833562942_6.doc @ 235664 @ 3 @ 1 11.5.5 SETTING MANUAL STEAM INJECTION Select the Manual steam injection field. Steam is injected. Pos : 135 /953- Eloma/BET /11_Laufender Betrieb/M ulti C ooki ng starten @ 21\mod_1550835811653_6.doc @ 235697 @ 3 @ 1 11.5.6...
Remove the finished cooked product as necessary. Pos : 138 /953- Eloma/BET /12_GENIU S MT Bac kmas ter Edition/GEN IUS MT Bac kmas ter Edi tion_[Titel] @ 21\mod_1550842991334_6.doc @ 235803 @ 1 @ 1...
Page 106
The fault message flashes underneath the current time Shows fault messages. Start screen Tab. 26: Elements of the GENIUS Backmaster Edition Pos : 140 /953- Eloma/BET /12_GENIU S MT Bac kmas ter Edition/Bilds chir m manuelles Bac ken @ 21\mod_1550846776100_6.doc @ 235869 @ 2 @ 1...
The main elements of the screen are shown in detail in see section 6.2. Pos : 141 /953- Eloma/BET /12_GENIU S MT Bac kmas ter Edition/Betriebs art Bac ken mit Besc hwadung @ 21\mod_1550847037432_6.doc @ 235902 @ 3 @ 1 12.2.1...
Page 108
GENIUS MT Backmaster Edition Fig. 60: Manual baking screen in baking operating mode with steam injection (Climatic® MT monitor hidden) INFORMATION: Climatic® MT monitor is hidden from the screen by swiping upwards with the finger, and the operator then accesses the additional functions and further inputs.
Page 109
GENIUS MT Backmaster Edition Item Symbol Designation/function Baking time field Open the baking time selection window. (Only available before starting the program) Off time field Sets the off time for the baked goods. Steam injection field Set the steam injection.
Page 110
GENIUS MT Backmaster Edition Pos : 142 /953- Eloma/BET /12_GENIU S MT Bac kmas ter Edition/Betriebs art Bac ken ohne Besc hwadung @ 21\mod_1550847716668_6.doc @ 235935 @ 3 @ 1 12.2.2 BAKING OPERATING MODE WITHOUT STEAM INJECTION Manual baking in baking operating mode without steam injection Fig.
Page 111
Tab. 30: Settings for baking without steam injection Pos : 143 /953- Eloma/BET /12_GENIU S MT Bac kmas ter Edition/Bac kbetri ebs art wählen und ändern @ 21\mod_1550847984777_6.doc @ 235968 @ 3 @ 1 12.2.3 SELECTING AND CHANGING THE BAKING OPERATING MODE INFORMATION: ...
Arrow key for showing the action line of the cooking step Action menu Tab. 31: Elements of the Step overview screen Pos : 145 /953- Eloma/BET /12_GENIU S MT Bac kmas ter Edition/Beschwadung ändern @ 21\mod_1550848587012_6.doc @ 236034 @ 2 @ 1...
UP/DOWN arrow keys (2) when the Temperature field (green) is selected. Pos : 147 /953- Eloma/BET /12_GENIU S MT Bac kmas ter Edition/Bac ksc hritt über Bac kz eit eins tell en_[Ti tel] @ 21\mod_1550848930069_6.doc @ 236100 @ 2 @ 1...
GENIUS MT Backmaster Edition 12.6 SETTING THE BAKING STEP BY BAKING TIME Pos : 148 /953- Eloma/BET /12_GENIU S MT Bac kmas ter Edition/Bac kz eit eins tell en @ 21\mod_1550848963050_6.doc @ 236133 @ 3 @ 1 12.6.1 SETTING THE BAKING TIME Set/change baking time Fig.
Page 116
The off time field is only available when baking with steam injection. Pos : 150 /953- Eloma/BET /12_GENIU S MT Bac kmas ter Edition/Z us atz funkti onen wähl en und eins tell en @ 21\mod_1550849168425_6.doc @ 236199 @ 2 @ 1...
GENIUS MT Backmaster Edition 12.7 SELECTING AND SETTING ADDITIONAL FUNCTIONS INFORMATION: Activated or changeable additional functions are highlighted in green in the additional functions field area. 4b/c Additional functions Fig. 67: field area screen Item Symbol Designation/function Fan timer field Can be set for a set speed.
Page 118
Tab. 32: Symbol and display fields for the field area Pos : 151 /953- Eloma/BET /12_GENIU S MT Bac kmas ter Edition/Bac ksc hritt hinzufüg en, änder n, l ösc hen und duplizieren @ 21\mod_1550849601435_6.doc @ 236232 @ 2 @ 1...
12.8 ADDING, CHANGING, DELETING AND DUPLICATING A BAKING STEP Pos : 152 /953- Eloma/BET /12_GENIU S MT Bac kmas ter Edition/Bac ksc hritt hinzufüg en @ 21\mod_1550849639620_6.doc @ 236265 @ 3 @ 1 12.8.1 ADDING A BAKING STEP Fig. 68:...
Page 120
Select the Save ( ) field. Use the Back field or Step overview field to complete the process. Pos : 154 /953- Eloma/BET /12_GENIU S MT Bac kmas ter Edition/Bac ksc hritt duplizi eren_en @ 21\mod_1551802941483_6.doc @ 237812 @ 3 @ 1...
Page 121
The number of cooking steps is increased by 1. The baking time is added. Select the Back field to complete the process. Pos : 155 /953- Eloma/BET /12_GENIU S MT Bac kmas ter Edition/Bac ksc hritt l ösc hen_en @ 21\mod_1551803093304_6.doc @ 237846 @ 3 @ 1...
Page 122
The number of cooking steps is reduced by 1. Select the Back field to complete the process. Pos : 156 /953- Eloma/BET /12_GENIU S MT Bac kmas ter Edition/Z eitvor wahl einstell en @ 21\mod_1550850283600_6.doc @ 236397 @ 2 @ 1...
The respective timer setting is highlighted in green. Set the desired time with the UP/DOWN arrow keys. Pos : 157 /953- Eloma/BET /12_GENIU S MT Bac kmas ter Edition/Bac kpr ogramm wähl en @ 21\mod_1550850387930_6.doc @ 236430 @ 2 @ 1...
Use the Save or Back field to complete the process. Pos : 160 /953- Eloma/BET /12_GENIU S MT Bac kmas ter Edition/Z us atz funkti on Vorheiz en/Cool D own (Auto-Temp) änder n @ 21\mod_1550851188711_6.doc @ 236529 @ 2 @ 1...
Select the Preheat/cool down (auto temp) field in the additional functions selection. Touch the UP/DOWN arrow keys to set the temperature in increments of 1°C (1°F). Pos : 161 /953- Eloma/BET /12_GENIU S MT Bac kmas ter Edition/M ulti Baki ng @ 21\mod_1550851320359_6.doc @ 236562 @ 2 @ 1...
Multi Baking is only available for baking programs with one single baking step. Pos : 162 /953- Eloma/BET /12_GENIU S MT Bac kmas ter Edition/M ulti Baki ng in der Akti onszeil e des gewählten Programms @ 21\mod_1550851475940_6.doc @ 236595 @ 3 @ 1 12.12.1 MULTI BAKING IN THE ACTION LINE OF THE SELECTED PROGRAM Select the Multi Cooking field in the action line of the program.
Page 127
Multi Baking ends with the end of the last selected program. Pos : 164 /953- Eloma/BET /12_GENIU S MT Bac kmas ter Edition/Liste der Bac kprogramme für M ulti Baki ng änder n @ 21\mod_1550851842779_6.doc @ 236661 @ 344444 @ 1 12.12.3 CHANGING THE LIST OF BAKING PROGRAMS FOR MULTI-BAKING.
Page 128
(∞). The baking program is added to the list. Use the Save or Back field to complete the process. Pos : 165 /953- Eloma/BET /13_Rei nigung und Pflege/Rei nigung und Pflege_[Titel] @ 21\mod_1551018461706_6.doc @ 236862 @ 1 @ 1...
Page 130
Risk of scalding from hot steam! Skin burns. Allow the device to cool down before cleaning. Pos : 169 /953- Eloma/BET /13_Rei nigung und Pflege/Gar-/Bac kr aumrei nigung mit autoclean® _[Ti tel] @ 18\mod_1524474052122_6.doc @ 208276 @ 2 @ 1...
Cleaning and servicing 13.2 COOKING/BAKING CHAMBER CLEANING WITH AUTOCLEAN® Pos : 170 /953- Eloma/BET /13_Rei nigung und Pflege/Steuer ung R ei nigung und Pfl ege ( autoclean®) _en @ 21\mod_1551803273838_6.doc @ 237880 @ 3 @ 1 13.2.1 CLEANING AND SERVICING CONTROL (AUTOCLEAN)®)
Page 132
Cleaning and servicing Item Symbol Designation/function Cleaner field • Indicates the filling quantity of the cleaner tank (fig. left). • Indicates that the cleaner tank has to be replaced (fig. right). • Reset to 100% after the cleaner tank has been replaced by selecting the acknowledge field.
Page 133
• Active Temp: quick, but consumes additional water and energy. Default setting: Auto Temp (automatic, without water consumption) Pos : 171 /953- Eloma/BET /13_Rei nigung und Pflege/Rei nigungs- und Pfl egeprogramme @ 21\mod_1551015177176_6.doc @ 236763 @ 3 @ 1...
Page 134
Tab. 34: Description of the cleaning and servicing programs Pos : 172 /953- Eloma/BET /13_Rei nigung und Pflege/autoclean R einigungspr ogramm s tarten @ 19\mod_1530714935034_6.doc @ 220227 @ 34 @ 1...
Page 135
"Drying", the cleaning program "Rinsing out" has to run before a cooking/baking process can be started again. Pos : 173 /953- Eloma/BET /13_Rei nigung und Pflege/Kanis ter für Rei niger oder Kl arspül er wechs eln @ 19\mod_1524476258741_6.doc @ 208442 @ 34 @ 1...
Page 136
Always connect the rinsing agent to the blue canister connection. Switch on the device. Start the commissioning cleaning program. Pos : 174 /953- Eloma/BET /13_Rei nigung und Pflege/Rei nigungs programm Inbetriebnahme starten @ 19\mod_1524476655700_6.doc @ 208475 @ 34 @ 1 13.2.5 STARTING THE COMMISSIONING CLEANING PROGRAM...
Cleaning and servicing Pos : 175 /953- Eloma/BET /13_Rei nigung und Pflege/Garraum rei nigen mit Dr uc kpumpenz erstäuber (manuell) für GENIU SMT Bac kmas ter Edition ohne autoc @ 21\mod_1551016396620_6.doc @ 236796 @ 24 @ 1 13.3 CLEANING THE COOKING CHAMBER WITH THE PRESSURE...
Cleaning and servicing 13.4 CLEANING INTERVALS Cleaning intervals can be set and called up as a function for regular cleaning. Fig. 75: Setting and activating cleaning interval Item Function Default value Setting range Settings/Service Parameter = 21 in , level 2 Cleaning interval ON/OFF Interval...
Page 139
Outer surfaces Degreasing cleaning agent or stainless steel cleaner, soft cloth Tab. 36: Overview of cleaning intervals (manual cleaning) Pos : 177 /953- Eloma/BET /13_Rei nigung und Pflege/Bildschir m r einigen @ 21\mod_1551017454742_6.doc @ 236829 @ 244 @ 1...
Window cleaner leads to smudging. – Washing-up liquid you can damage the coating on the monitor. Pos : 178 /953- Eloma/BET /13_Rei nigung und Pflege/Abtr opfri nne an Gar-/Bac kr aumtür r einigen @ 19\mod_1524476996874_6.doc @ 208508 @ 24 @ 1...
Clean the door seal with a cloth and mild degreasing cleaning agent. Remove the cleaning agent with clear water. Pos : 180 /953- Eloma/BET /13_Rei nigung und Pflege/Innentür der T ür mit D oppel verglas ung/Dreifac hverglas ung und T ürgläser r einigen @ 19\mod_1524477351878_6.doc @ 208574 @ 2 @ 1...
Clean the glass panes with a degreasing cleaning agent and a soft cloth. Cleaning stainless steel with stainless steel cleaner or a mild cleaning agent and a soft cloth. Pos : 181 /953- Eloma/BET /13_Rei nigung und Pflege/Wass erfilter wechsel n @ 19\mod_1524477826863_6.doc @ 208607 @ 24 @ 1...
Select the Servicing field. servicing screen is displayed. Select the Water filter field. The counter for the water filter is reset. Pos : 182 /953- Eloma/BET /13_Rei nigung und Pflege/Wartungsi nter vall e_en @ 21\mod_1551804052548_6.doc @ 237948 @ 2 @ 1...
We recommend that you conclude a maintenance contract with Eloma. Have maintenance carried out at least 1 x per year by an Eloma service partner. Maintenance intervals can be set and called up as a function for regular maintenance.
Page 145
• The display can only be reset manually and at service level, i.e. by the service partner. Pos : 183 /953- Eloma/BET /14_Ei nstellung/Ser vice/Ei nstellung/Ser vic e_[Titel ] @ 21\mod_1551019247915_6.doc @ 236896 @ 1 @ 1...
Settings/Service 14 SETTINGS/SERVICE Pos : 184 /953- Eloma/BET /14_Ei nstellung/Ser vice/Änder ung der allgemeinen Ei nstellungen_en @ 21\mod_1551804195846_6.doc @ 237982 @ 2 @ 1 14.1 CHANGING THE GENERAL SETTINGS Settings/Service Fig. 78: screen INFORMATION: Areas marked with * are protected by password and are displayed in...
Page 147
Settings/Service Level 1 Level 2 Description Device information Shows basic information on the combi steamer (important when contacting the hotline) Select the field to display the information larger and in more detail [Date and time] Sets the day of the week, hours and minutes [Set language] Selects the language...
Page 148
Settings/Service Level 1 Level 2 Description • Image management* Deletes all or individual images • Saves all or individual images to USB stick • Loads all images from USB stick • Program management Deletes all or individual cooking programs • Saves all or individual cooking programs to USB stick •...
Page 149
Water supply – Resets cleaner and rinsing agent – Cleaning intervals Settings/Service Tab. 39: Elements of the screen (access levels 3 to 4) Pos : 185 /953- Eloma/BET /14_Ei nstellung/Ser vice/Pass wort-Manager_en @ 21\mod_1551804403535_6.doc @ 238016 @ 2 @ 1...
• The password can be displayed/hidden as text by clicking on the Change view field on the left-hand side of the password line. Pos : 186 /953- Eloma/BET /14_Ei nstellung/Ser vice/Parameterei nstellungen_en @ 21\mod_1551804531821_6.doc @ 238050 @ 3 @ 1...
Page 151
Settings/Service 14.2.1 PARAMETER SETTINGS No: Text Selection option/ default Description Activate/deactivate with The time display can be switched 11: Time Format 24 h toggle button to 24 h format or 12 h (AM, PM). Default: Activated Activated: 24 h; Deactivated: 12 h The temperature can be Activate/deactivate with displayed in degrees Celsius (°C)
Page 152
Settings/Service No: Text Selection option/ default Description EndCombiProgram To indicate the end of the EndProgram preheating process, a tone EndStep 31: Reach preheat sounds for a certain time. The KeepWarm sound user has the option to select a ReachPreheat tone from a range of different StartCombiProgram tones.
Page 153
Settings/Service No: Text Selection option/ default Description The volume of the tone that From volume level 0 to 42: Multi Cooking end sounds at the end of the volume level 10. volume Multi Cooking process can be Default: 5 adjusted. From 0 s to 999 s 43: Multi Cooking end The playback time of the tone is...
Page 154
Settings/Service No: Text Selection option/ default Description EndCombiProgram EndProgram This tone sounds at the EndStep beginning of the holding process 55: Keep warm sound KeepWarm of the special program ReachPreheat Cook & Hold. StartCombiProgram Default: ReachPreheat The volume of the tone that From volume level 0 to sounds at the beginning of the 56: Keep warm volume...
Page 155
Settings/Service No: Text Selection option/ default Description UTC-12; UTC-11; UTC-9:30; UTC-9; UTC-8; UTC-7; UTC-6; UTC-5; UTC-4; UTC-3:30; UTC-3; UTC-2; UTC-1; UTC±0; UTC+1; UTC+2; UTC+3; UTC+3:30; UTC+4; UTC+4:30; UTC+5; The user can select the 64: Time zone UTC+5:30; UTC+5:45; difference to the world time UTC+6;...
Page 156
Settings/Service No: Text Selection option/ default Description Time of cooking/baking step can Activate/deactivate with 116: Time values in be set in hours and minutes toggle button seconds (standard) or in minutes and Default: Deactivated seconds. Selection between different symbols for continuous Activate/deactivate with 117: Show --:-- for operation.
Page 157
Settings/Service No: Text Selection option/ default Description The user has the option to select the display of the cleaning levels under 5 selection options. Display all cleaning levels Display all cleaning levels: all Only display Level 1 cleaning levels are available. Only display Level 2 Only display Level 1: only 127: Autoclean level...
Page 158
Settings/Service No: Text Selection option/ default Description The user can select a standard for preheating for the programs. Full PreHeating adjustment: free Full PreHeating adjustment setting of preheating before Fixed on "no Preheating" starting the program, no 133: Preheating mode Fixed on "Preheating"...
Page 159
Settings/Service No: Text Selection option/ default Description Activate/deactivate with When activating this parameter, 146: autoclean with toggle button a warning not to open the door "do not open" Default: Deactivated during cleaning is displayed. When you are working in repeat mode, this is where you can determine whether or not preheating is performed again...
Page 160
Settings/Service No: Text Selection option/ default Description Activate/deactivate with The menu groups in the program 159: Hide menu groups toggle button list can be hidden. Default: Deactivated The user can activate/deactivate the display of the remaining total baking time after the start of the Activate/deactivate with 160: Show total rest program.
Page 161
"Please clean" has been H20_00; H21_00; H22_00; displayed. That way, cleaning H23_00 can be forced. Default: H02_00 Tab. 40: Selection of important parameter settings Pos : 187 /953- Eloma/BET /15_Fehler behebung/Fehler tbehebung_[Titel ] @ 21\mod_1551020999368_6.doc @ 236963 @ 1 @ 1...
Troubleshooting TROUBLESHOOTING Pos : 188 /953- Eloma/BET /15_Fehler behebung/Fehler ursachen und M aßnahmen @ 19\mod_1524483700945_6.doc @ 208840 @ 2 @ 1 15.1 CAUSES OF FAULT AND MEASURES Faults Possible cause Measure Switch on the master The device does The external master switch switch.
Page 163
Combi steamer Show mode is mode. does not heat up switched on. Tab. 41: Description of faults, possible causes and measures Pos : 189 /953- Eloma/BET /15_Fehler behebung/Stör ungs meldung en und Behebung @ 19\mod_1524484415190_6.doc @ 208908 @ 2 @ 1...
Rinsing agent is empty agent . (15%). Rinsing agent is empty (30%). Replace the water Water filter is empty. filter. Contact an Eloma Water pressure is too service partner. low. Close the Cooking/baking cooking/baking chamber door is open. chamber door.
Page 165
Gas devices only Check the gas Fault on the gas connection. system. Switch on the exhaust extraction system. Select the symbol with the small flame. If the fault message is repeated: Contact an Eloma service partner.
Page 166
Contact an Eloma service partner. Tab. 42: Description of fault messages, possible causes and measures for gas and electrical devices Pos : 190 /953- Eloma/BET /16_Ents orgung und U mwel tschutz/Entsorgung und U mweltsc hutz @ 19\mod_1526559677854_6.doc @ 215478 @ 1 @ 1...
We will happily help you with disposal of the device. The Eloma customer service department will be happy to provide the following information for the economical return/disposal of used Eloma products in your region: •...
Page 172
Pos : 194 /953- Eloma/Layout/Rüc kseite_allg @ 19\mod_1526050709967_6.doc @ 214539 @ @ 1 WE AT ELOMA WILL BE HAPPY TO HELP YOU WITH ANY QUESTION RELATING TO OUR PRODUCTS CUSTOMER SERVICE ____________ T. +49 8141 395-188 F. +49 8141 395-164 sales@eloma.com...
Need help?
Do you have a question about the GENIUS MT and is the answer not in the manual?
Questions and answers