Vivitar DVR 985HD User Manual page 7

- The LED charge light is ON while the battery is recharging.
- The LED charge light turns off when the battery is fully charged.
B. Charge the battery using the USB connection cable (included) and the AC Adapter
(included).
- Connect one end of the USB connection cable into the USB port on your camera.
- Connect the other end to the AC Adapter and then plug the AC Adapter into a power
socket.
- The LED charge light is ON while the battery is recharging.
- The LED charge light turns off when the battery is fully charged.
Note:

Some features, such as Flash, will not work if the battery power level is low.

When the battery power is low the battery icon turns red and the camera will
automatically turn off a few seconds later.

The energy status of the power is displayed on LCD as shown below:
Full battery power
2) SD Card
Make sure an SD card has been properly inserted into your camera. (SD card not included.)
Important: You must use a Class 4 SD card or higher SD card only.
Medium battery power
6
Low battery power