Philco PHEM 1050 User Manual page 25

30 MINS
PRESS SETTING
EMPTY TRAY
INSTALL TRAY
SOLVENT IN TANK
PRESS SETTING
DECALCIFYING
EMPTY TRAY
INSTALL TRAY
CLEAN WATER TANK
FILL WATER TANK
PRESS SETTING
DECALCIFYING
EMPTY TRAY
INSTALL TRAY
READY
Copyright © 2017, Fast ČR, a. s.
It will take around 30 minutes. Press
setting to start descaling.
Prearation for descaling and cleaning.
First of all, emply the drip tray,
because it would drain some waste
water into drip tray.
Install tray.
Take a bag of decalcifi er and
suffi ciently dissolves it in clean water
then lead this mixed liquid to the water
tank, and reinstall the water tank to
coffee machine.
To start descaling and cleaning for the
fi rst time, put a container, of which the
capacity is more than 1L, under the
coffee spout.
Empty tray.
Install tray.
After the fi rst stage of descaling and
cleaning, take the water tank out and
clean it. Add purifi ed water again, and
reinstall it to the coffee machine.
Press setting button to enter the
second stage of descaling and
cleaning.
To clean the residual decalcifi er in
pipes.
Put a container, of which the capacity
is more than 1L, under the coffee spout.
Empty tray.
Install tray.
When the screen shows "READY", it
indicates the descaling is completed;
Now, you can continue to make coffee.
23
EN
1
2
3
4
5
Revision 10/2017