Philco PHEM 1050 User Manual page 23

NEED BREW CLEAN
READY
MENU
MAINTENANCE
BREW CLEAN
BREW CLEAN
CONFIRM
EMPTY TRAY
INSTALL TRAY
PRESS SETTING
CLEANING
ADD TABLET
PRESS SETTING
CLEANING
EMPTY TRAY
INSTALL TRAY
Copyright © 2017, Fast ČR, a. s.
After a period of time use, if the brew
unit need to be cleaned, the screen will
reming you "NEED BREW CLEAN",
press setting button to enter into brew
unit clean process.
Press left and right button to choose
"MENU", then press setting butoon to
enter into program setting menu.
Press left and right button to choose
"MAINTENANCE", then press setting
butoon to enter into maintenance
setting.
Press left and right button to choose
"BREW CLEAN", press setting button
into the page.
Press left and right button to choose
"BREW CLEAN CONFIRM", press
setting button to start cleaning brewing
unit.
The drip tray should be cleaned before
cleaning brew unit. Because waste
water will be dripped to the tray.
Install the drip tray.
After istalling the drip tray, screen
shows "PRESS SETTING" to start.
The brew unit is cleaning.
Open the coffee powder container lid
and add the cleaning tablet, close the
coffee powder container lid and press
the cleaning button to clean the brew
unit.
Brew unit is cleaning.
Empty the drip tray.
Install the drip tray.
21
EN
Revision 10/2017