Kenwood M-9000S Operating Instructions Manual page 49

10.2 Manual setting
You can also set ensembles manually. To do this, use the <MENU> button to call up the menu and
select "Manual tune". Then select the desired station and confirm with <OK>. Now information
about the ensemble and the signal strength are displayed. Another pressing of the <OK> button
selects the corresponding stations in the list.
10.3 Station list
Press the <MENU> button and confirm "Station list" with <OK>. Use the <UP/DOWN> buttons or
the <TUNE> knob to select a station and press <OK> to confirm. The device starts playing automat-
ically.
Note: The reception quality of a station depends on factors such as weather, installation location
and antenna orientation. If a station from the station list cannot be received, change the orientation
of the antenna or the location of the radio. Stations that can no longer be received can be removed
from the station list.
10.4 Delete stations that can no longer be received
Stations that can no longer be received can be deleted from the list. To do this, press the <MENU>
button and select "Prune invalid". With "This removes all invalid stations, continue?" select
"Yes" and these stations will be deleted. Selecting "NO" takes you back into the menu without delet-
ing the stations.
10.5 Favourites (memory locations)
20 memory locations (favourites) are available for storing DAB+ stations. To call up saved stations
on the main unit, please press the <*> button and select the desired memory location by pressing
<SELECT>.
10.5.1 Storing DAB+ stations with the remote control:
Memory locations 1–10 can be assigned using the number buttons on the remote control. To do
this, select the desired station and press a number key on the remote control until "Preset stored"
appears on the display. The memory locations can now be called up by pressing the remote control
briefly.
10.5.2 Saving DAB+ stations in memory locations 11 - 20:
Select the desired station and hold down the <FAVOURITE> button on the radio or <FAV> on the
remote control. Now select a memory location from the list of station memories and confirm the
selection with the <TUNE> button on the radio. The "Preset stored" appears on the display. You
can easily call up the memory locations by briefly pressing the <FAV> on the remote control. Use the
<UP/DOWN> buttons or the <TUNE> knob to select a station and press <OK> to confirm.
Note: The memory locations cannot be deleted, but can only be overwritten with other stations.
17