Setting Error Items And Destination Addresses To Which E-Mail Is To Be Sent When An Error Occurs (Mail - Recipient Settings); To Which E-Mail Is To Be Sent When An Error Occurs (Mail – Recipient Settings) - Eiki EIP-4500 Setup Manual

Setting Error Items and
Destination Addresses to
which E-mail is to be Sent
when an Error Occurs
(Mail – Recipient Settings)
On this screen, you can input e-mail destina-
tions to which error notification (error items)
e-mails are sent.
Items
E-mail Set addresses to which error
Address notification e-mail is sent. You
can set up to five addresses.
Error Mail Error e-mail is sent on the error
(Lamp, Temp,
items checked in their check
Fan, Cover) boxes.
Test
Send test e-mail. This allows
you to confirm that the settings
for e-mail transmission are
properly set.
Note
• E-mail Address can be up to 64 characters.
• You can input the characters below :
a-z, A-Z, 0-9, !, #, $, %, &, *, +, -, /, =, ?, ^, {, |,
}, ~ , _, ', ., @, `
(You can input "@" only one time.)
• For details about error items, refer to the
owner's manual of the projector.
Description
Controlling the Projector via LAN
27