RCA RDR6350 Quick Start Manual

Communications Systems
What's Included:
RDR6350
Mobile Radio Standard Mobile Mic
MB6350
Mobile Mounting Bracket Mobile Power Supply Cable
1 2 3
9 10 11 12
16
Prodcut Overview:
1 LED Indicator
3 LCD Display
5 Menu / Enter Button
7 Down Button
9 Emergency Call Button
Power On / Off / On-Hook
11
Button
13 Cancel / P2 Button
15 Accessories Interface
17 Power Interface
Positioning Module Antenna
19
Interface
RDR6350 Mobile
Digital Radio
MM6350 HGRMM6350
Mic Hanger
PC6350
4 5 6 7 8
13 14 15
17 18 19
Volume Control / Channel
2
Selector Knob
4 Option / Back / Home Button
6 Up Button
8 Speaker
10 Handheld Microphone Interface
12 Enter / P1 Key
Power Level / Lock / Unlock
14
Button
16 RF Antenna Base
18 Accessories Interface
Complete User Manual at:
Installation:
Read the following precautions before installing the mobile terminal:
• The radio operates with cathode-grounded power supply of 13.6V ± 15%
only. Please check polarity and voltage of the power supply on the vehicle
before you install the radio.
• Please check how long the screws will extend from the bottom surface of
the radio, before you install the radio. Drill the mounting hole cautiously to
avoid damage to the vehicle wiring and other parts.
• Please connect RCA supplied antenna and power cord to the radio, before
you install it in the bracket. And make sure the antenna and power cord is
dedicated for RCA digital radios to prevent injuries to passengers.
• Set the mobile terminal in a location convenient on the front panel for easy
operation.
• Please make sure there's sufficient space at the back of the radio for wiring.
• When the fuse for DC power cord needs replacement, it must be replaced
by a fuse with the same specification.
Installation Tools:
Electric Drill, Philips Head Screwdriver, and Hex Socket Sleeve
Installation Diagram:
11
12
13
14
A. Install the bracket 7 with cross screw 8 in a proper position.
B. Connect the accessories such as the radio antenna and power cord to the
mobile 1.
C. Slide the mobile radio 1 into the mounting bracket 7 and fix it with cross
screw 6.
D. Install the microphone hanger 9 in a location where it's easy to reach the
microphone.
E. Plug the handheld microphone 10 into the microphone jack on the front
panel of mobile radio 1 and place it on the hanger when not in use.
1 Mobile Radio
Position Module Antenna
3
Interface
Hardware Bracket Knob
5
Underlay
7 U-Shaped Bracket
Handheld Microphone
9
Hanger
11 RF Antenna Base
13 Black Power Line
RCACommunicationsSystems.com
QUICK START GUIDE
2 Accessory Interface
4 Power Supply Socket
6 Hardware Bracket Knob
8 M6 Self-tapping Cross Screw
10 Handheld Microphone
12 Red Power Line
14 Fuse
1
2
3
4
5
6
7
8
9
10