U-Line BROTHER H-8754 Manual page 6

11. Minimize Brother Color Label Editor app and go
to Settings on device. In Settings, go to WiFi and
ensure it is turned on. Select Brother VC-500W ####
network. (See Figure 23)
NOTE: Last four digits
of network name
(####) are the last
four digits of serial
number on bottom of
printer.
NOTE: Device has no
internet access while
connected directly to
printer.
12. Return to Brother Color Label Editor app. Once
device is connected, Connect Via Network WiFi will
turn green. Click Connect Via Network WiFi.
(See Figure 24)
Figure 24
13. WiFi setup is complete. Click Skip to go to home
screen and start designing labels. (See Figure 25)
Figure 25
PAGE 6 OF 27
SETUP CONTINUED
Figure 23
14. On home screen, check that label size is displayed
in top right corner to verify printer is connected. To
design a label, click New Design. (See Figure 26)
Figure 26
COMPUTER: SOFTWARE SETUP AND
NETWORK WIFI CONNECTION
1. On printer, press and hold WiFi button (1) for two
seconds to activate Infrastructure Mode. In
Infrastructure Mode, WiFi button LED is blue.
(See Figure 27)
NOTE: Infrastructure Mode allows printer to
connect to WiFi-enabled devices through
Network WiFi.
Figure 27
2. Connect printer to computer using micro USB
cable (12). Open web browser and go to
support.brother.com
NOTE: Website defaults to United States
(English). For other languages, click on Change
Countries or Regions (Language) in top left
corner.
0921 RH-8754