Summary of Contents for U-Line Dymo LabelWriter 450 Twin Turbo
Page 1
The form-feed button on the front of the printer advances a single label. The label eject button is used The Dymo LabelWriter 450 Twin Turbo printer is a direct to remove labels from the printer when changing rolls. thermal printer and does not use ink or toner. Instead,...
CONNECTING THE PRINTER NOTE: For Windows, do not connect the printer 4. Plug the USB cable Port to your computer until instructed to do so into the USB port on the bottom of the during the software installation. printer. (See Figure 3) TO CONNECT THE POWER 5.
Page 3
PRINTING PRINTING THE FIRST LABEL The first time you start DYMO Label software, a list of available label types is displayed on the left side of the The first time you open the application, you are asked window and an address label is displayed in the Edit to register the software.
π H-1266 800-295-5510 uline.mx DYMO LABELWRITER ® ® 450 TWIN TURBO ETIQUETADORA CARACTERÍSTICAS CARACTERÍSTICAS DE LA ETIQUETADORA El botón de alimentación de la parte delantera de la etiquetadora avanza una única etiqueta adhesiva. El La etiquetadora Dymo LabelWriter 450 Turbo Doble es botón de expulsión de etiquetas se utiliza para quitar las una etiquetadora térmica directa y no utiliza tinta ni etiquetas de la etiquetadora al cambiar el rollo.
Page 5
CONECTAR LA ETIQUETADORA NOTA: En el caso de Windows, no conecte la 4. Conecte el cable USB al puerto USB ubicado etiquetadora a una computadora hasta que se Port le indique que debe hacerlo durante el proceso en la parte inferior de de instalación del software.
Page 6
CONTINUACIÓN DE CARGAR ETIQUETAS NOTA: La etiquetadora emitirá las etiquetas 8. Repita los pasos 3 a 7 para cargar un segundo rollo adhesivas, deteniéndose al principio de la de etiquetas (por ejemplo, etiquetas para franqueo). primera etiqueta. Si la etiquetadora no emite las 9.
π H-1266 1-800-295-5510 uline.ca DYMO LABELWRITER 450 TWIN TURBO CARACTÉRISTIQUES CARACTÉRISTIQUES DE L'IMPRIMANTE Le bouton d'alimentation à l'avant de l'imprimante distribue une seule étiquette. Le bouton d'éjection L'imprimante LabelWriter Dymo 450 Twin Turbo est une d'étiquettes est utilisé pour retirer les étiquettes de imprimante thermique directe qui ne requiert ni encre, l'imprimante lors du changement de rouleau.
BRANCHEMENT DE L'IMPRIMANTE REMARQUE : Pour Windows, ne raccordez 4. Branchez le câble l'imprimante à un ordinateur que lorsque vous USB dans le port Port USB en dessous de en aurez reçu l'instruction lors de l'installation du logiciel. l'imprimante. (Voir Figure 3) POUR BRANCHER L' A LIMENTATION 5.
Page 9
IMPRESSION IMPRESSION DE LA PREMIÈRE ÉTIQUETTE La première fois que vous Démarrez le logiciel DYMO Label, une liste de types d'étiquettes est affichée sur le La première fois que vous ouvrirez l'application, vous côté gauche de la fenêtre et une étiquette d'adresse serez invité...