infobit iSpeaker M200 Quick Start

iSpeaker M200 Speakerphone Quick Start
1
Product Appearance
2
Packing List
3
About SpeakerPhone
No. Menu/Button
1
2
3
4
5
6
7
Built-in Speaker and Microphone, with efficiently AEC, ANS and AGC.
4
Use Speakerphone
Connect your speakerphone to remote conference.
1) Connect to PC or other conference host via USB cable.
2) Connect to the host via 3.5mm audio cable. For example, connect
mobile phone and start remote conference through the mobile app.
3) Connect speakerphone via Bluetooth (Without as default).
The M200 speakerphone can be charged via USB cable.
Use the volume up/down button to adjust the volume.
Function Description
Power Switch: long press 2 seconds to
shut down, short press 0.5 seconds to
start
Volume Up
Volume Down
Microphone Mute
Speaker Mute
USB Interface
3.5mm Audio Interface
To connect to the M200 via Bluetooth (without as default), select the
Bluetooth device B100 (default name) on the host to connect.
If you are connected to a Windows host, use the system control panel
to adjust the recording and playback volume to the appropriate location.
For Windows 7 and Windows 8, click Start > Control Panel > Hardware
and Sound > Sounds > Play and Record tab; for Windows 10, right-click
the Windows logo, click Control Panel > Hardware and Sound >
Sounds > Play and Record tab.
5
Safety Precautions
Electrical Safety
The installation and use of this product must strictly comply with local
electrical safety standards.
Transport Carefully
Prevent heavy damage, severe vibration or damage caused by immersion.
USB Cable Maintenance
Do not damage the USB cable, do not twist it, stretch it, and bundle it.
Do not press it under heavy objects or between items. This may cause
damage to the USB cable, resulting in fire or electric shock.
Use Environment
Please confirm that the ambient temperature and humidity meet the
requirements of the product before use. Please wait until the product is
naturally dry before plugging it into the USB port to turn on the power.
Do not Unauthorized Disassemble
This product has no parts which can be repaired by the user. The damage
caused by the user's own disassembly is not covered by warranty.
6
Warranty Card
If failure caused by non-human causes occurs within one year from the
date of purchase of the machine, you may enjoy the warranty service of the
product. Any of the following circumstances is not covered by the warranty:
Without disassemble, modification such as fault causes.
Use of an environment does not conform to requirements of the
product.
Irresistible factors, such as fire, earthquake, lightning strike, etc.
Warranty card does not match the product number or it is altered.
User Name
User Address/Post
Code
Contact Number
Product Model
Product Series
Purchasing Date
Invoice No.
Sales Department
User save, lost or not compensated
Sales Department: (seal)
INFOBIT AV
Website: www.infobitav.com
E-mail: info@infobitav.com
V1.0