Summary of Contents for ICP DAS USA WISE-52 Series
Page 1
WISE-5236M-4GE/WISE-5236M-4GC Quick Start v1.0, May 2018 Technical Support WISE-5236M-4GE / WISE-5236M-4GC User Manual: http://wise.icpdas.com/Download.html ftp://ftp.icpdas.com/pub/cd/wise_cd/ WISE-5236M-4GE / WISE-5236M-4GC Website: http://wise.icpdas.com What’s In the Box? In addition to this document, the package includes the following items: WISE-5236M-4GE microSD card and GSM Antenna micro SD/SD (ANT-421-04) WISE-5236M-4GC...
Page 2
Configuring the boot mode Before starting WISE-5236M-4GE/4GC at the first time, be sure that the switch is placed in the “0” position. Connect to PC, Network and Power The WISE-5236M-4GE/4GC is equipped with an RJ-45 Ethernet port for connection to an Ethernet hub/switch and PC. You can also link directly the WISE-5236M-4GE/4GC to PC with an Ethernet cable.
Page 3
Using Browser to Assign a New IP The WISE-5236M-4GE/4GC is an Ethernet controller, which comes with a default IP setting; therefore, you must first assign a new IP setting to the LAN1 port of WISE-5236M-4GE/4GC. The factory default IP settings of WISE-5236M-4GE/4GC are as follows: Item Default...
Page 4
Step6: After complete the IP setting, please save it, and then the new IP setting will take effect. Go to WISE-5236M-4GE/4GC Web Site to edit Control Logic Please follow the steps below to implement IF-THEN-ELSE control logic on ICP DAS WISE-5236M-4GE/4GC controllers: Step1: Open a browser, and type in the URL address of the WISE-5236M-4GE/4GC Open a browser and type in the URL address(The new IP setting) of...