IMPORTANT:
For full suction, it is important
that the Dirty Water Tank is properly secured before
cleaning.
CAUTION:
Do not clean over floor electrical
outlets. Water will drip from the tool after use and
may puddle. To avoid damage to wood and laminate
flooring and to avoid potential slip hazard, after use
(a) do not leave the product on wood and laminate
surfaces and move to a hard surface and (b) place
unit on an absorbent material (such as a towel) to
soak up drips.
Continue using dry strokes until little water is visible
passing through the nozzle.
For best results, HOOVER® recommends rinsing carpet
with water only. This removes residual carpet cleaning
solution. Fill Solution Tank with water and repeat. For
heavily soiled areas, repeat. Avoid saturating carpet.
NOTE: Empty Dirty Water Tank when the motor sound
becomes higher pitched and there is a loss in suction
(see "Automatic shut-off"). You will also see the float
rise and shut off suction at the same time.
9
Need help?
Do you have a question about the PowerDash Go and is the answer not in the manual?