Advertisement
Quick Links
PROBLEM
POSSIBLE CAUSE
Cleaner won't run
1. Power cord not firmly plugged into outlet
2. Power switch not on
Low suction or won't
1. Dirty Water Tank full and the automatic
shut-off engaged
pick up
2. Tanks and/or tank lids not in place
3. Nozzle not in place
Water puddles
1. Clean Water Tank not in place
behind cleaner
2. Dirty Water Tank full
Cleaner solution
1. Tanks not in place
won't dispense
2. Clean Water Tank is empty
Brushes won't rotate
1. Brushes not in place
2. Debris stuck in brushes
POSSIBLE SOLUTION
1. Plug cord in firmly
2. Turn power switch on
1. Empty the Dirty Water Tank
2. Make sure tanks and/or tank
lids are latched in place
3. Make sure Nozzle cover is
latched in place
1. Make sure Clean Water Tank
is installed properly
2. Empty Dirty Water Tank
1. Make sure both tanks are
locked in place
2. Refill Clean Water Tank
with water and solution
1. Turn unit off, check brushes
are locked into place
2. Remove any debris stuck
between brushes
Advertisement
Related Manuals for Hoover POWERDASH FH41000
Summary of Contents for Hoover POWERDASH FH41000
- Page 1 PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION Cleaner won’t run 1. Power cord not firmly plugged into outlet 1. Plug cord in firmly 2. Power switch not on 2. Turn power switch on Low suction or won’t 1. Dirty Water Tank full and the automatic 1.
Need help?
Do you have a question about the POWERDASH FH41000 and is the answer not in the manual?
Questions and answers
Missing the water tank cap where can I get a replacement?
You can find a replacement water tank cap for the Hoover FH41000 as part of the Clean Water Tank and Cap Assembly (part number 440014578). It is available for purchase online from retailers that sell Hoover parts.
This answer is automatically generated
How do you fix the switch on the PowerDASH FH41000